M.A. Ford
M.A. Ford CXDSR 0830AP Cyclone Xd 5X Solid Double Margin Drill 8.30mm pneumatic accessory
An 8.30 mm solid double-margin drill bit designed for high-precision pneumatic drilling applications
- Solid double-margin design improves hole straightness
- Cyclone Xd coating extends tool life in tough materials
- 5× diameter reach drills deeper without pecking
- 30 mm diameter suits precise metric hole sizes
- New condition delivers full factory performance
8.30 mm solid double-margin drill
The M.A. Ford Cyclone Xd 5X is a solid-carbide drill with a double-margin design, supplied new for pneumatic and power-tool users who need accurate holes in tough materials. Its 8.30 mm diameter suits metalworking, maintenance and light-production tasks where hole quality matters more than high-volume speed.
Deciding specification: 8.30 mm cutting diameter
The single figure that determines fit is the 8.30 mm nominal diameter; the tool will only produce the intended hole size when the machine spindle and workpiece can accept that exact dimension. No other diameter or shank size is offered for this part number.
Installation and common issues
Clamp the drill in a clean, correctly sized collet or chuck and run at the speed recommended for the workpiece material to avoid premature margin wear. The most frequent problem is excessive run-out caused by worn holders, which quickly degrades the double-margin guidance and leads to oversize or rough holes.
Highlights
- Solid double-margin design improves hole straightness
- Cyclone Xd coating extends tool life in tough materials
- 5× diameter reach drills deeper without pecking
- 30 mm diameter suits precise metric hole sizes
- New condition delivers full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 5X in Cyclone Xd 5X mean for hole depth in practice?
The 5X indicates the drill can reach a depth up to five times its 8.30 mm diameter in a single pass.
What shank style does the CXDSR 0830AP use for tool-holder fit?
It has a straight round shank sized for standard collets and drill chucks that accept 8.30 mm shanks.
What physical clearance does the 8.30 mm body need inside a fixture?
The solid carbide body measures 8.30 mm in diameter, so the fixture bore or guide must provide at least that much clearance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
