M.A. Ford
M.A. Ford CXDCS 1160AP 11.60mm Cyclone Xd 3X Coolant Fed Double Margin Drill
11.60 mm double-margin drill with internal coolant feed for three-times-diameter depth
- 60 mm diameter drills precise holes
- Cyclone Xd geometry improves chip evacuation
- 3X coolant-fed design enhances tool life
- Double margin construction increases hole accuracy
- M.A. Ford quality ensures reliable performance
11.60 mm Cyclone Xd Drill
The M.A. Ford CXDCS 1160AP is a 11.60 mm diameter solid-carbide drill built for high-performance holemaking. It targets machine shops and production lines that need accurate, repeatable results in difficult materials. The double-margin design improves hole straightness and surface finish while supporting the tool during deep cuts. This new tool arrives ready for immediate use in coolant-fed machining centres.
3X Diameter Coolant-Fed Limit
The drill’s 3X diameter flute length defines the maximum practical drilling depth without pecking. Through-tool coolant delivery is essential to evacuate chips and control heat at this depth-to-diameter ratio. Exceeding the 3X limit reduces chip evacuation reliability and can cause premature wear or breakage. Users must match machine coolant pressure and volume to the tool’s requirements for stable performance.
Upgrade From Standard Twist Drills
This Cyclone Xd drill replaces conventional twist drills when tighter tolerances, better finish or higher feed rates are required. The jump is worth it for repeated short-hole operations in tough alloys where standard tools wander or burn out. It does not suit applications needing longer reach beyond 3X diameter or non-coolant machines. Shops without through-spindle coolant cannot use this tool effectively.
Highlights
- 60 mm diameter drills precise holes
- Cyclone Xd geometry improves chip evacuation
- 3X coolant-fed design enhances tool life
- Double margin construction increases hole accuracy
- M.A. Ford quality ensures reliable performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Should I choose the 11.60mm diameter for my application?
Select the 11.60mm size when your hole specification calls for that exact diameter; the CXDCS 1160AP is ground to this dimension for precise fit.
What does the 3X designation mean when the drill is in the spindle?
The 3X indicates a flute length suited for holes up to three times the 11.60mm diameter, allowing deeper cuts without pecking.
How does the coolant-fed design affect the drilling process?
Internal coolant channels deliver fluid directly to the cutting edges, improving chip evacuation and tool life in deep-hole drilling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
