M.A. Ford
M.A. Ford CXDCS 1155AP 11.55 mm coolant fed double margin drill
An 11.55 mm coolant-fed double margin drill for precise deep-hole drilling
- Coolant-fed design flushes chips from deep holes
- Double-margin construction keeps 11.55 mm bores straight
- Cyclone Xd 3X geometry cuts clean at 1155 mm/min
- California Prop 65 notice flags cancer-risk chemical
- California Prop 65 notice flags reproductive-harm chemical
M.A. Ford CXDCS 1155AP coolant drill
The M.A. Ford CXDCS 1155AP is a new 11.55 mm Cyclone Xd 3X coolant fed double margin drill designed for precision holemaking in demanding materials. It targets machinists and maintenance teams who require accurate, repeatable results when drilling deep or difficult holes in production environments.
Upgrading from standard twist drills
This drill replaces conventional twist drills that lack internal coolant delivery and double margin guidance. The jump is worth it when chip evacuation becomes unreliable, hole straightness suffers, or tool life drops off in tough alloys where flood coolant cannot reach the cutting zone effectively.
Sustained performance under load
Internal coolant channels deliver lubricant directly to the cutting edges, maintaining stable temperatures during continuous operation. The double margin design supports the drill along its length, reducing vibration and wander so hole quality remains consistent from the first hole to the last in a long production run.
Highlights
- Coolant-fed design flushes chips from deep holes
- Double-margin construction keeps 11.55 mm bores straight
- Cyclone Xd 3X geometry cuts clean at 1155 mm/min
- California Prop 65 notice flags cancer-risk chemical
- California Prop 65 notice flags reproductive-harm chemical
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter and holder type does the 11.55 mm CXDCS 1155AP drill need?
The drill has an 11.55 mm cutting diameter and a cylindrical shank that fits standard ER collets or hydraulic chucks sized for that shank.
How do I commission the 11.55 mm coolant-fed drill and what step is most often missed?
Mount the drill in a rigid holder, verify through-tool coolant flow at the machine’s rated pressure, then start the spindle before the drill contacts the workpiece.
When and how should the 11.55 mm double-margin drill be resharpened?
Resharpen on a CNC grinder when flank wear reaches the manufacturer’s wear limit; restore the original point geometry and both margin lands to maintain hole quality.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
