M.A. Ford
M.A. Ford CXDCS 1110AP Cyclone Xd 11.10mm Coolant-Fed Double Margin Drill
An 11.10 mm coolant-fed double-margin drill designed for efficient chip evacuation and precise hole-making
- 10 mm diameter matches precise hole requirements
- Coolant-fed design delivers fluid to the cutting zone
- Double-margin construction improves hole straightness
- Cyclone Xd geometry supports efficient chip evacuation
- New condition ensures full factory performance
Application scope
The M.A. Ford CXDCS 1110AP Cyclone Xd is a coolant-fed double-margin drill built for machine-shop professionals who need reliable hole-making in metal. Its 3X coolant-fed design delivers lubricant directly to the cutting zone for controlled chip evacuation. Buyers who need a hand-held or non-coolant tool will not be served by this geometry.
Diameter specification
The single specification that decides fit is the 11.10 mm cutting diameter, which must match the hole size called out on the drawing. No other diameter or tolerance is offered in this part number, so verify the required size before ordering.
Sustained-load behaviour
Under continuous cutting the internal coolant passages maintain stable temperatures at the cutting edges, reducing thermal drift during long cycles. The double-margin construction supports the drill body for consistent straightness when the tool remains engaged for extended periods. California Proposition 65 warnings apply to chemicals present in the product.
Highlights
- 10 mm diameter matches precise hole requirements
- Coolant-fed design delivers fluid to the cutting zone
- Double-margin construction improves hole straightness
- Cyclone Xd geometry supports efficient chip evacuation
- New condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 11.10 mm diameter mean for the holes I drill?
It sets the finished hole size at 11.10 mm, so you get a precise bore matching that dimension in a single pass.
What does the 3X coolant-fed label tell me about the shank and machine fit?
The shank follows standard fractional sizing for 11.10 mm drills, fitting common ER collets and hydraulic holders used on CNC machining centres.
What clearance and holder style does the double-margin body need?
The double-margin design needs a rigid holder and enough spindle travel for the flute length; it mounts in any standard drill holder that accepts an 11.10 mm shank.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
