M.A. Ford
M.A. Ford CXDCS 1040AP Cyclone Xd 10.40mm Coolant Fed Drill
A 10.40 mm coolant-fed drill with double margins for accurate deep-hole drilling
- Precision drilling with 10.40mm diameter
- Coolant-fed design for efficient heat removal
- Double margin construction improves hole accuracy
- Cyclone Xd 3X geometry enhances chip evacuation
- New condition ensures full factory performance
10.40 mm Coolant-Fed Drill
The M.A. Ford Cyclone Xd 1040AP is a 10.40 mm solid carbide drill designed for high-performance drilling with through-coolant capability. Its double-margin geometry improves hole straightness and surface finish in demanding materials. The tool targets machine shops and production environments requiring precise, deep-hole drilling. It arrives new and ships directly from the manufacturer.
Suited for CNC production runs
This drill suits operators running CNC machines with through-spindle coolant who need consistent performance in steel, stainless steel or high-temperature alloys. The 3x diameter flute length supports moderately deep holes without pecking cycles. Buyers without coolant-through spindles or those needing extended reach beyond 3x diameter should evaluate alternative tooling. The Prop 65 notice indicates chemical content requiring workplace awareness.
Standard shank fits common holders
The cylindrical shank mounts directly into standard ER collets, hydraulic chucks or shrink-fit holders without adapters. Coolant holes align automatically when the tool is seated correctly in a through-coolant holder. Common issues include insufficient coolant pressure causing chip packing or premature wear if run dry. Verify machine coolant filtration to prevent blockage of the internal channels.
Highlights
- Precision drilling with 10.40mm diameter
- Coolant-fed design for efficient heat removal
- Double margin construction improves hole accuracy
- Cyclone Xd 3X geometry enhances chip evacuation
- New condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle and coolant system do I need for the 10.40 mm CXDCS 1040AP drill?
The drill requires a machine spindle that accepts a 10.40 mm shank and a through-spindle coolant system capable of delivering cutting fluid at the pressure recommended for 3×D drilling.
Can I run the CXDCS 1040AP in a standard drill chuck without through-coolant?
The tool is designed for coolant-fed operation; running it in a standard chuck without through-coolant will reduce chip evacuation and may shorten tool life.
How do I verify the CXDCS 1040AP is cutting correctly after installation?
Check for consistent chip formation, steady spindle load, hole diameter within tolerance at 10.40 mm, and no excessive flank wear on the double margins after the first few holes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
