M.A. Ford
M.A. Ford CXDCS 1030AP Cyclone Xd 10.30 mm coolant fed double margin drill
Coolant-fed 10.30 mm double-margin drill enables efficient deep-hole drilling
- Coolant-fed design clears chips efficiently during deep drilling
- Double margin construction improves hole straightness and surface finish
- Cyclone Xd geometry optimises cutting performance in tough materials
- 30 mm diameter suits precise hole-making applications
- Brand-new M.A. Ford tooling ensures reliable machining results
10.30 mm Cyclone Xd coolant-fed drill
The M.A. Ford CXDCS 1030AP is a 10.30 mm diameter drill designed for coolant-fed machining applications. Its double margin geometry supports hole straightness and surface finish in production drilling tasks. This new cutting tool targets machinists and manufacturing engineers who require precise, deep-hole capability with internal coolant delivery.
Double margin design and coolant limits
The double margin construction guides the drill to maintain alignment, though chip evacuation still depends on adequate coolant pressure and volume. The 3X designation indicates a length-to-diameter ratio suited for moderately deep holes rather than extreme depths. Users must verify machine spindle coolant capability matches the tool's feed requirements to avoid thermal damage.
Installation and common issues
Secure the drill in a high-precision holder with minimal runout to protect the cutting edges and margins. Ensure the coolant passages are clear before starting, as blockages cause rapid overheating and premature wear. Incorrect feed rates or insufficient coolant flow are the primary causes of margin damage and hole quality problems.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- Double margin construction improves hole straightness and surface finish
- Cyclone Xd geometry optimises cutting performance in tough materials
- 30 mm diameter suits precise hole-making applications
- Brand-new M.A. Ford tooling ensures reliable machining results
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Which diameter should I select for the CXDCS 1030AP Cyclone Xd drill?
The 10.30 mm size is the single diameter offered for this model.
What does the 10.30 mm figure mean once the drill is in the machine?
It defines the exact hole diameter the tool will produce when run at its rated parameters.
What interface does the drill use and what does it cap in practice?
It uses a standard cylindrical shank that fits common drill chucks and collets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
