M.A. Ford
M.A. Ford CXDCS 0990AP Cyclone Xd 9.90 mm coolant-fed drill
Coolant-fed double-margin drill cuts 9.90 mm holes with 3X chip evacuation
- Coolant-fed design improves chip evacuation and tool life
- Double margin construction enhances hole accuracy and surface finish
- Cyclone Xd geometry optimises performance in difficult materials
- 90 mm diameter suits precise drilling applications
- California Proposition 65 warning indicates regulated chemical content
Cyclone Xd 9.90 mm Coolant-Fed Drill
The M.A. Ford CXDCS 0990AP is a solid-carbide Cyclone Xd drill with a 9.90 mm diameter. It features 3× diameter flute length and coolant-fed double margins for chip evacuation and hole accuracy. The tool is supplied new and is intended for production drilling in steel, stainless steel and high-temperature alloys.
Suited for CNC shops needing precise deep holes
This drill suits machinists running CNC centres with through-spindle coolant who need consistent 3×D depth in difficult materials. It is not for hand-held use, for machines without coolant capability, or for diameters other than 9.90 mm. Buyers who need different lengths, step drills or indexable inserts should look at other tooling.
9.90 mm diameter fixes the hole size
The single specification that decides fit is the 9.90 mm cutting diameter. The tool cuts a 9.90 mm hole and only that size, so the workpiece drawing must call for this exact diameter. Verify the print before ordering.
Highlights
- Coolant-fed design improves chip evacuation and tool life
- Double margin construction enhances hole accuracy and surface finish
- Cyclone Xd geometry optimises performance in difficult materials
- 90 mm diameter suits precise drilling applications
- California Proposition 65 warning indicates regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 9.90 mm Cyclone Xd drill include coolant fittings or must they be sourced separately?
The drill is a coolant-fed double-margin tool; fittings and coolant supply are not included and must be purchased separately.
How do I decide between the 9.90 mm size and other diameters in the Cyclone Xd range?
Choose the 9.90 mm drill when the hole diameter required matches 9.90 mm; other diameters in the range serve different hole sizes.
What does the 3X coolant-fed rating mean for chip evacuation in a CNC machine?
The 3X coolant-fed design delivers high-pressure coolant through the tool to improve chip evacuation and extend tool life in deep-hole drilling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
