M.A. Ford
M.A. Ford CXDCS 0730AP Cyclone Xd 7.30mm Coolant-Fed Drill
A 7.30 mm coolant-fed drill with double margins for precise deep-hole drilling
- 30 mm diameter drills precise holes in tough materials
- Coolant-fed design removes heat and chips for longer tool life
- Double-margin construction keeps the drill running straight and true
- Cyclone Xd geometry cuts efficiently at 3× diameter depth
- California Proposition 65 warning informs safe handling practices
M.A. Ford CXDCS 0730AP Cyclone Xd Drill
The M.A. Ford CXDCS 0730AP is a 7.30mm coolant-fed drill from the Cyclone Xd series. It is designed for machinists and maintenance professionals who require a double-margin geometry for hole accuracy and straightness. The tool targets users performing deep-hole drilling operations where internal coolant delivery is essential for chip evacuation and tool life.
7.30mm Diameter and 3X Coolant-Fed Capacity
This drill handles holes at a nominal 7.30mm diameter with a 3X diameter drilling depth capability. The through-coolant design pushes chips forward efficiently in deeper cuts where external flood coolant cannot reach. It runs out when the application demands a larger diameter, a longer length-to-diameter ratio beyond 3X, or a different shank style not offered in this specific configuration.
Double-Margin Geometry for CNC Build Integration
The double-margin construction provides four lands that guide the drill, improving finish and positional accuracy in CNC machining centres and rigid lathes. It requires a tool holder and spindle capable of delivering high-pressure coolant through the tool body. The design frees up the need for secondary finishing passes in many materials by holding tighter tolerances straight from the drill.
Highlights
- 30 mm diameter drills precise holes in tough materials
- Coolant-fed design removes heat and chips for longer tool life
- Double-margin construction keeps the drill running straight and true
- Cyclone Xd geometry cuts efficiently at 3× diameter depth
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 7.30 mm Cyclone Xd drill work with my existing coolant-fed tool holder?
The drill has a coolant-fed design with double margins that fits standard holders for 7.30 mm shanks; verify your holder accepts 3X coolant-fed drills before use.
How can I confirm the 7.30 mm drill is cutting correctly after installation?
Check for consistent chip evacuation through the coolant channels and measure hole diameter against the 7.30 mm specification during the first few cuts.
Does the box include coolant fittings or only the 7.30 mm drill bit?
The package contains the CXDCS 0730AP drill only; coolant fittings, holder clamps and cutting fluid must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
