M.A. Ford
M.A. Ford CXDCS 0600AP Cyclone Xd 6.00 mm coolant-fed drill
6.00 mm coolant-fed drill with double margins for 3× diameter drilling depth
- Coolant-fed design enables efficient chip evacuation during drilling
- 00 mm diameter suits precise hole-making applications
- Double margin construction improves hole straightness and surface finish
- 3X flute geometry supports higher feed rates in tough materials
- New condition ensures full factory performance from first use
M.A. Ford CXDCS 0600AP Cyclone Xd drill
The M.A. Ford CXDCS 0600AP Cyclone Xd is a 6.00 mm coolant-fed drill designed for precision holemaking. It suits machinists and fabricators who need a double-margin geometry for improved hole straightness and surface finish. The tool targets applications requiring consistent coolant delivery directly to the cutting zone. It is not for buyers who need larger diameters or indexable insert systems.
Double margin design with through-coolant channels
The double margin construction provides four-point contact to stabilise the drill during deep-hole operations. Internal coolant passages feed fluid to the tip, aiding chip evacuation and reducing heat buildup at the cutting edges. This configuration supports tighter tolerances in materials that work-harden or produce stringy chips. The shank fits standard tool holders without proprietary adapters.
Thermal management and cutting performance
Through-coolant delivery controls temperatures at the drill point, extending tool life in demanding alloys. Efficient chip removal lowers cutting forces and reduces the risk of built-up edge formation. The geometry maintains consistent performance across the full 3X diameter drilling depth. Operators should match feed and speed parameters to the specific workpiece material.
Highlights
- Coolant-fed design enables efficient chip evacuation during drilling
- 00 mm diameter suits precise hole-making applications
- Double margin construction improves hole straightness and surface finish
- 3X flute geometry supports higher feed rates in tough materials
- New condition ensures full factory performance from first use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank standard does the 6.00 mm Cyclone Xd drill use, and what does that limit?
It uses a standard straight shank, which limits it to collet or chuck holders and caps run-out to the holder's precision.
What clearance and holder capacity does the 6.00 mm diameter require?
The 6.00 mm body needs a matching 6.00 mm collet or chuck and enough spindle clearance for the 3×D flute length.
How is the coolant-fed Cyclone Xd installed, and what step is often missed?
Secure it in a sealed coolant holder, then verify coolant flows through the internal channels before starting the spindle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
