M.A. Ford
M.A. Ford CXDCS 0530AP Cyclone Xd 5.30 mm coolant-fed drill
A 5.30 mm coolant-fed double-margin drill designed for high-performance drilling applications
- Coolant-fed design enables efficient chip evacuation during deep-hole drilling
- 30 mm diameter suits precise hole-making in metalworking applications
- Double-margin construction improves hole straightness and surface finish
- Cyclone Xd geometry supports 3× diameter drilling depth capability
- California Proposition 65 warning indicates regulated chemical content awareness
5.30 mm Coolant-Fed Drill
The M.A. Ford CXDCS 0530AP Cyclone Xd is a 5.30 mm coolant-fed drill built for production drilling in metal. Its double-margin design improves hole straightness and surface finish in tough alloys. Machinists running CNC centres or rigid manual machines will value the through-coolant capability for chip evacuation. This tool targets shops that need repeatable accuracy at 3× diameter depth.
Sustained Load Behaviour
Coolant delivered through the tool body flushes chips continuously during deep-hole cycles, preventing packing and reducing heat at the cutting edges. The double margins stabilise the drill over the full 3× depth, limiting wander and maintaining diameter tolerance. Consistent coolant pressure keeps temperatures steady, so tool life remains predictable across long batches without the sudden wear spikes seen in external-cooling setups.
Upgrade Path
The Cyclone Xd replaces conventional twist drills or single-margin coolant drills that struggle with chip control at 3× depth in stainless, titanium or high-temperature alloys. Shops seeing rework from oversize holes, poor finish or premature flank wear will justify the switch. Operations limited to shallow holes, soft materials or intermittent use without through-spindle coolant will not gain the same return.
Highlights
- Coolant-fed design enables efficient chip evacuation during deep-hole drilling
- 30 mm diameter suits precise hole-making in metalworking applications
- Double-margin construction improves hole straightness and surface finish
- Cyclone Xd geometry supports 3× diameter drilling depth capability
- California Proposition 65 warning indicates regulated chemical content awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 5.30 mm Cyclone Xd drill generate noticeable heat or vibration during extended coolant-fed drilling cycles?
The double-margin design and through-coolant channels keep the 5.30 mm tip stable and cool during long runs, reducing heat buildup and vibration compared with standard drills.
What toolholder and coolant delivery system are required to run this 5.30 mm coolant-fed drill?
You need a compatible drill chuck or collet that accepts a 5.30 mm shank and a machine spindle with through-coolant capability to supply fluid to the internal channels.
Will the 5.30 mm Cyclone Xd drill work reliably in an older CNC mill that lacks high-pressure coolant?
The drill is designed for through-coolant operation; on an older mill without high-pressure delivery you may see reduced chip evacuation and shorter tool life at the 5.30 mm diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
