M.A. Ford
M.A. Ford CXDCS 0300AP Cyclone Xd 3mm Coolant-Fed Double Margin Drill
Coolant-fed double-margin drill delivers precise 3.00 mm holes with internal lubrication
- Coolant-fed design enables efficient chip evacuation during deep-hole drilling
- Double margin construction improves hole straightness and surface finish
- Cyclone Xd geometry optimised for high-performance drilling in tough materials
- 00 mm diameter suits precision drilling applications
- New condition ensures full factory performance and reliability
M.A. Ford CXDCS 0300AP 3mm Drill
The M.A. Ford CXDCS 0300AP is a 3.00 mm coolant-fed double margin drill from the Cyclone Xd 3X range. It is manufactured by M.A. Ford for precision hole-making in demanding materials. The tool delivers coolant directly to the cutting zone for improved chip evacuation. This new drill suits professional machining operations requiring tight tolerances.
For CNC Shops Needing Coolant-Through 3mm
Machinists running CNC centres with through-spindle coolant will benefit from the internal coolant channels and double margin design. Buyers who need a larger diameter or a non-coolant drill should look at other sizes or styles. The tool is not suited for manual drilling or machines without coolant capability. Shops without high-pressure coolant systems may not realise the full performance.
3.00 mm Diameter Decides Fit
The 3.00 mm cutting diameter is the critical specification that determines whether this drill matches the required hole size. Verify the workpiece material and machine coolant pressure against the tool’s design intent. California Proposition 65 warnings apply to this product. Select this drill only when the application calls for a 3 mm coolant-fed double margin geometry.
Highlights
- Coolant-fed design enables efficient chip evacuation during deep-hole drilling
- Double margin construction improves hole straightness and surface finish
- Cyclone Xd geometry optimised for high-performance drilling in tough materials
- 00 mm diameter suits precision drilling applications
- New condition ensures full factory performance and reliability
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Should I pick the 3.00 mm Cyclone Xd or a different diameter for my job?
Choose the 3.00 mm size when the hole diameter must be exactly three millimetres; other diameters are separate part numbers and not interchangeable with this drill.
What does the 3X designation mean once the drill is in the spindle?
The 3X label indicates a flute length roughly three times the 3.00 mm diameter, giving a deeper drilling reach in a single pass.
How does the coolant-fed shank affect the maximum usable speed?
Internal coolant delivery lets you run higher spindle speeds and feed rates by removing heat at the cutting edges, limited only by your machine and tool-holder rigidity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
