M.A. Ford
M.A. Ford CXDCR 1925AP Cyclone Xd 19.25mm Drill
19.25 mm coolant-fed double-margin drill delivers 5× diameter depth capability
- 25 mm diameter drills precise holes
- 5× coolant-fed design clears chips efficiently
- Double-margin geometry improves hole straightness
- Cyclone Xd series built for high-performance drilling
- New M.A. Ford tool ready for immediate use
Cyclone Xd 19.25 mm Drill
The M.A. Ford CXDCR 1925AP Cyclone Xd is a 19.25 mm diameter drill built for high-performance drilling. It features a 5X coolant-fed design with double margins to improve hole quality and tool life. This new cutting tool targets professional machining operations requiring precision and efficient chip evacuation.
Machinists needing deep-hole accuracy
Shops drilling deep holes in difficult materials will benefit from the internal coolant delivery and stable double-margin geometry. The design supports consistent diameter control and surface finish at 5X diameter depth. Buyers who need a standard twist drill without through-coolant capability or a different diameter should look at something else.
Coolant-fed shank changes chip control
The through-tool coolant channels direct high-pressure fluid to the cutting zone, clearing chips from deep holes and reducing heat at the cutting edges. Double margins guide the drill for straighter holes and better roundness. No additional software or accessories are included with this cutting tool.
Highlights
- 25 mm diameter drills precise holes
- 5× coolant-fed design clears chips efficiently
- Double-margin geometry improves hole straightness
- Cyclone Xd series built for high-performance drilling
- New M.A. Ford tool ready for immediate use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What size drill chuck or tool holder is required for the 19.25 mm shank?
The drill has a 19.25 mm diameter shank, so the chuck or holder must accept that exact size.
Can this 1925AP Cyclone Xd drill be used with a standard non-coolant drill press?
It is a 5X coolant-fed design, so the machine must supply coolant through the spindle; a standard press without through-coolant will not feed fluid to the cutting zone.
How can I verify the double-margin drill is cutting correctly after installation?
Check that both margins contact the hole wall evenly and that coolant exits steadily from the through-holes during operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
