M.A. Ford
M.A. Ford CXDCR 1450AP 14.50mm Cyclone Xd 5X Coolant Fed Double Margin Drill
A 14.50 mm coolant-fed double-margin drill designed for 5× depth holes
- 50 mm diameter drills precise holes in one pass
- 5× diameter reach handles deep-hole jobs without pecking
- Coolant-fed design flushes chips and controls heat
- Double-margin geometry keeps the drill running straight
- New M.A. Ford Cyclone Xd cutter built for production use
14.50mm Cyclone Xd drill
The M.A. Ford CXDCR 1450AP is a solid-carbide drill built for high-performance holemaking in demanding materials. Its 5x diameter flute length and double-margin design target shops that need accurate, deep holes without pecking cycles. The tool suits CNC departments running difficult alloys where chip control and straightness are critical. It is not for hand-held use or low-rigidity setups that cannot maintain coolant pressure.
5xD reach with coolant feed
The 14.50 mm diameter and 5x length-to-diameter ratio give extended reach for deep-hole applications in a single pass. Through-coolant delivery flushes chips from the flute space, preventing packing at depth. Double margins stabilise the drill, holding size and finish where single-margin tools wander. The design runs out of effective chip evacuation in cross-hole or interrupted-cut features that break coolant flow.
Thermals managed by coolant
Internal coolant channels carry heat directly from the cutting zone, keeping the carbide body stable during continuous cuts. Double margins reduce frictional contact compared to full-land designs, lowering torque spikes and audible resonance. The tool draws only the power the machine spindle delivers; no external cooling accessories are required. Proposition 65 notices apply to the coating chemistry.
Highlights
- 50 mm diameter drills precise holes in one pass
- 5× diameter reach handles deep-hole jobs without pecking
- Coolant-fed design flushes chips and controls heat
- Double-margin geometry keeps the drill running straight
- New M.A. Ford Cyclone Xd cutter built for production use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 14.50mm Cyclone Xd 5X drill fit the same tool holders as my older 14mm drills?
The 14.50mm diameter is larger than a standard 14mm shank, so it requires a holder or collet sized for 14.50mm; check your tooling specifications for compatibility.
How can I verify the coolant-fed double-margin design is functioning correctly on the machine?
Confirm steady coolant flow through the drill’s internal channels during operation and inspect holes for the improved straightness and surface finish the double-margin geometry provides.
Does the box include any collets, seals or coolant adapters for the 14.50mm shank?
The product ships as the drill bit only; collets, seals and coolant adapters for the 14.50mm shank must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
