M.A. Ford
M.A. Ford CXDCR 1210AP 12.10 mm Cyclone Xd 5X Coolant Fed Double Margin Drill
A 12.10 mm Cyclone Xd drill with 5× coolant feed and double margins for precise drilling
- 10 mm diameter suits precise hole sizing
- 5X flute design improves chip evacuation speed
- Coolant-fed channels reduce heat buildup
- Double margin construction enhances drilling stability
- M.A. Ford manufacturing ensures professional-grade durability
12.10 mm Cyclone Xd 5X Drill
This 12.10 mm Cyclone Xd 5X coolant-fed double margin drill from M.A. Ford targets professional machinists and maintenance teams who need precise, deep-hole drilling in tough alloys. The specialist geometry supports accurate hole straightness and improved chip evacuation during extended production runs. Buyers who need larger diameters or non-coolant-fed tooling will need a different specification.
Thermals, noise and power draw
The drill body manages heat through internal coolant channels that deliver fluid directly to the cutting zone, reducing thermal buildup at the workpiece interface. Cutting noise and machine power draw depend on the host equipment, spindle speed and material being drilled rather than the tool alone. No standalone acoustic or electrical ratings are published for this cutting tool.
Sustained-load behaviour
Under continuous operation the double margin design maintains hole alignment and surface finish while the coolant feed flushes chips from deep holes. The Cyclone Xd 5X geometry resists deflection during long cuts, helping to preserve dimensional tolerance over repeated cycles. Tool life varies with workpiece hardness, coolant quality and programmed feed rates.
Highlights
- 10 mm diameter suits precise hole sizing
- 5X flute design improves chip evacuation speed
- Coolant-fed channels reduce heat buildup
- Double margin construction enhances drilling stability
- M.A. Ford manufacturing ensures professional-grade durability
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the CXDCR 1210AP 12.10 mm drill and what step is often missed?
Mount the drill in a rigid holder with through-coolant capability, then verify that the coolant passages align before tightening; skipping the alignment check causes premature margin wear.
What maintenance or replacement will the CXDCR 1210AP need during its life?
Inspect the double margins after each job; replace the drill when margin wear reaches the supplier's wear limit or when hole quality drops below tolerance.
What limit appears first on the CXDCR 1210AP during sustained high-feed drilling?
The double-margin design shifts the first limit to margin wear rather than chip evacuation, so monitor margin land width for the earliest sign of failure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
