M.A. Ford
M.A. Ford CXDCR 1160AP Cyclone Xd 11.60 mm coolant-fed drill
Coolant-fed double-margin drill delivers 5× diameter depth at 11.60 mm
- 60 mm diameter targets precise hole sizes
- coolant-fed design clears chips during deep drilling
- double-margin construction improves hole straightness
- Cyclone Xd geometry supports 5× diameter depth
- new condition ensures full factory performance
11.60 mm coolant-fed drill
The M.A. Ford CXDCR 1160AP Cyclone Xd is a 5X coolant-fed double margin drill designed for precision holemaking. It targets machinists and maintenance teams who require accurate deep-hole drilling in demanding materials. The tool arrives new and ships directly from the manufacturer.
Sustained load behaviour
Coolant fed through the tool body manages heat during extended cutting cycles, reducing thermal damage to the cutting edges. The double margin design stabilises the drill in the hole, maintaining alignment and surface finish over long drilling depths. This construction supports consistent performance where standard drills might wander or overheat.
Practical limits
The 11.60 mm diameter fixes the hole size, so the drill cannot be used for larger or smaller bores without a different tool. Coolant-fed operation requires a machine spindle and holder capable of delivering through-tool coolant at adequate pressure. Proposition 65 warnings indicate the presence of chemicals linked to cancer and reproductive harm, requiring appropriate handling procedures.
Highlights
- 60 mm diameter targets precise hole sizes
- coolant-fed design clears chips during deep drilling
- double-margin construction improves hole straightness
- Cyclone Xd geometry supports 5× diameter depth
- new condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 11.60 mm coolant-fed drill generate during continuous operation?
The double-margin design and internal coolant channels carry heat away from the cutting edges, keeping the tool body cooler during extended drilling cycles.
What machine setup is required to use the coolant-fed CXDCR 1160AP drill?
A spindle or holder with through-coolant capability and a compatible 11.60 mm tool holder are needed to supply cutting fluid through the drill.
Will the 11.60 mm Cyclone Xd drill fit in my existing 11.60 mm tool holders?
Yes, the 11.60 mm shank diameter matches standard holders for that size, so it installs directly without adapter sleeves.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
