M.A. Ford
M.A. Ford CXDCR 1040AP 10.40 mm Cyclone Xd 5X Coolant Fed Double Margin Drill
A 10.40 mm Cyclone Xd drill with 5x coolant feed and double margins for precise deep-hole drilling
- 40 mm diameter drills precise holes
- 5X coolant-fed design clears chips efficiently
- Double margin construction improves hole straightness
- Cyclone Xd geometry reduces cutting forces
- California Prop 65 chemical warning applies
M.A. Ford CXDCR 1040AP drill
The M.A. Ford CXDCR 1040AP is a Cyclone Xd 5X coolant-fed double margin drill with a 10.40 mm diameter. It is designed for machining operations that require precise hole placement and effective chip evacuation through internal coolant delivery. This tool suits professionals working with demanding materials where stability and cooling are critical. The new condition ensures full factory performance from first use.
Capacity and headroom
The 10.40 mm cutting diameter defines the hole size this drill produces in a single pass. Its 5X length-to-diameter ratio provides reach for moderately deep holes while maintaining rigidity through the double margin design. Coolant-fed operation extends tool life in materials that generate high heat. The drill runs out of effective capacity when hole depths exceed the 5X ratio or when diameters larger than 10.40 mm are required.
Thermals noise and power
Internal coolant delivery manages cutting temperatures directly at the drill point during operation. This reduces thermal buildup in both the tool and workpiece compared to external cooling methods. The double margin design improves stability, which can lower vibration-related noise during cutting. Power draw depends on the machine spindle, workpiece material and cutting parameters selected by the operator.
Highlights
- 40 mm diameter drills precise holes
- 5X coolant-fed design clears chips efficiently
- Double margin construction improves hole straightness
- Cyclone Xd geometry reduces cutting forces
- California Prop 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 10.40 mm Cyclone Xd drill fit my existing 5X coolant-fed tool holder?
The 10.40 mm shank is manufactured to standard tolerances for 5X coolant-fed holders, so it seats securely in compatible collets and hydraulic chucks.
How can I verify the double-margin geometry is cutting correctly on first use?
Check for two distinct, polished contact bands on the drill body and listen for a steady, low-vibration sound; chip evacuation should be consistent through the coolant holes.
Does the box include coolant fittings or only the 10.40 mm drill body?
The package contains the CXDCR 1040AP drill only; coolant adapters, seals and holder hardware must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
