M.A. Ford
M.A. Ford CXDCR 0620AP Cyclone XD 5X Drill 6.20mm
Coolant-fed double-margin drill cuts 6.20 mm holes five diameters deep
- 5x diameter drilling depth increases hole-making reach
- Coolant-fed design delivers fluid directly to the cutting zone
- Double-margin construction improves hole straightness and finish
- 20 mm diameter suits precise metric drilling applications
- New condition ensures full factory performance from first use
M.A. Ford CXDCR 0620AP Cyclone XD 5X Drill 6.20mm
This M.A. Ford solid carbide drill features a 6.20 mm diameter and a 5X diameter flute length. It uses a coolant-fed, double-margin design for improved hole straightness and surface finish. The tool targets professional machinists producing deep holes in demanding materials.
Coolant-fed double-margin geometry limits
Through-coolant delivery requires a machine spindle and tool holder rated for high-pressure coolant. The double margins guide the drill but increase torque demand compared to single-margin tools. Chip evacuation depends on sufficient coolant volume and pressure matching the 5X depth.
Check machine and holder compatibility
Verify the machine spindle provides through-coolant capability at the pressure your application requires. Confirm the tool holder accepts a 6.20 mm shank and seals correctly for coolant feed. Ensure the workholding accommodates the 5X drill length without interference.
Highlights
- 5x diameter drilling depth increases hole-making reach
- Coolant-fed design delivers fluid directly to the cutting zone
- Double-margin construction improves hole straightness and finish
- 20 mm diameter suits precise metric drilling applications
- New condition ensures full factory performance from first use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Should I choose the 6.20mm Cyclone XD 5X drill or another diameter?
The 6.20mm size matches holes that need that exact diameter; select a different diameter only if the hole spec differs.
What does the 5X designation mean when the drill is in the machine?
5X indicates the flute length allows drilling up to five times the 6.20mm diameter in a single pass.
How does the coolant-fed double-margin design affect the drilling standard?
Internal coolant delivery and twin margins improve chip evacuation and hole straightness, letting the drill run at higher feed rates without wandering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
