M.A. Ford
M.A. Ford CDACRM1190 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
A coolant-fed cyclone drill with two flutes designed for 5× drilling depth in aluminium, model CDACRM1190
- Designed for aluminium machining with 5x diameter reach
- Two-flute geometry improves chip evacuation in soft alloys
- Coolant-fed design directs fluid to the cutting zone
- M.A. Ford engineering for consistent hole quality
- California Proposition 65 warning applies to this product
Cyclone Drill for Aluminium Machining
The M.A. Ford CDACRM1190 is a specialised cutting tool designed for drilling aluminium workpieces. Its two-flute geometry and five-times-diameter reach suit production runs where chip evacuation and hole depth matter. The coolant-fed design directs lubricant through the tool body to the cutting zone.
Coolant-Fed Shank and Flute Geometry
Internal coolant passages reduce heat buildup and flush chips from deep holes without manual intervention. The two-flute layout balances material removal rate with rigidity in softer alloys. This construction supports consistent performance in automated drilling cycles.
Proposition 65 Compliance Notice
The product carries a California Proposition 65 warning for substances linked to cancer and reproductive harm. Users should follow shop safety protocols including ventilation and personal protective equipment. The notice applies to the tool as supplied and does not describe a functional limitation.
Highlights
- Designed for aluminium machining with 5x diameter reach
- Two-flute geometry improves chip evacuation in soft alloys
- Coolant-fed design directs fluid to the cutting zone
- M.A. Ford engineering for consistent hole quality
- California Proposition 65 warning applies to this product
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 5X in the CDACRM1190 Cyclone Drill indicate for drilling depth?
The 5X designation means the drill can reach a depth of five times its diameter in a single pass.
What shank style does the CDACRM1190 Cyclone Drill use for tool-holder fit?
It uses a straight cylindrical shank designed for standard hydraulic or shrink-fit holders.
How do you activate coolant flow through the CDACRM1190 Cyclone Drill during installation?
Connect the machine's through-spindle coolant supply to the holder; the drill's internal channels then feed fluid to the cutting edges.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
