M.A. Ford
M.A. Ford CDACRM1120 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
Cyclone drill for aluminium with 5× diameter reach, two flutes and through-coolant feed
- Designed for aluminium machining with 5X diameter capability
- Two-flute geometry improves chip evacuation in soft metals
- Internal coolant feed extends tool life and hole quality
- Cyclone series optimised for high-speed drilling applications
- California Proposition 65 warning for chemical exposure awareness
M.A. Ford CDACRM1120 Cyclone Drill
The M.A. Ford CDACRM1120 is a Cyclone drill engineered specifically for aluminium applications. It features a 5X diameter design with two flutes and internal coolant feed capability. This new power tool targets machinists and fabricators who require efficient chip evacuation and temperature control in non-ferrous materials.
Suited for aluminium drilling with coolant access
This drill suits operators running CNC machines or rigid setups equipped with through-spindle coolant systems. The 5X length and coolant channels support deeper holes in aluminium alloys. It is not for buyers lacking coolant-fed spindles, for hand-held drilling, or for those machining steel, titanium, or other ferrous metals.
5X diameter 2 flute coolant fed geometry
The defining specification is the 5X diameter-to-depth ratio combined with a two-flute coolant fed geometry. This configuration determines whether the tool reaches your required hole depth while managing heat and chips in aluminium. Verify your machine provides through-tool coolant and that the 5X length matches your workpiece thickness before purchasing.
Highlights
- Designed for aluminium machining with 5X diameter capability
- Two-flute geometry improves chip evacuation in soft metals
- Internal coolant feed extends tool life and hole quality
- Cyclone series optimised for high-speed drilling applications
- California Proposition 65 warning for chemical exposure awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often will the two-flute coolant-fed design need re-sharpening when drilling aluminum?
Re-sharpening interval depends on feed rate and aluminum alloy; the two-flute geometry and through-coolant delivery extend edge life by evacuating chips efficiently.
What limits continuous drilling depth with the 5× length-to-diameter ratio?
The 5× L/D ratio makes chip evacuation and coolant pressure the practical depth limit before deflection or heat buildup reduces hole quality.
How much heat and noise does the CDACRM1120 generate during all-day production runs?
Through-coolant flow removes heat at the cutting zone, keeping the drill body cooler and reducing the high-pitched whistle common with dry deep-hole drilling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
