M.A. Ford
M.A. Ford CDACRM1090 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
Coolant-fed cyclone drill with two flutes and 5× diameter reach for aluminium machining
- Designed for aluminium with a 5x reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design reduces heat buildup
- Cyclone series built for high-speed drilling
- M.A. Ford quality for professional workshops
M.A. Ford CDACRM1090 Cyclone Drill
The M.A. Ford CDACRM1090 Cyclone Drill is a new cutting tool designed for aluminium machining. It targets professional machinists and fabricators who require a dedicated drill for non-ferrous materials. The 5X designation indicates its length-to-diameter ratio for deeper hole applications. This tool is not suited for machining steel, titanium or hardened alloys.
5X 2 Flute Coolant Fed Geometry
The single specification that decides fit is the 5X 2 flute coolant fed design. Two flutes balance chip evacuation with core strength in aluminium while internal coolant delivery flushes chips from deep holes. Without through coolant capability this drill cannot clear chips effectively at 5X depth. Buyers needing a solid drill without coolant holes or a different flute count for other materials should select another tool.
Sustained Deep Hole Drilling Behaviour
Under sustained load the coolant fed design maintains consistent chip evacuation at 5X depth preventing packing and heat buildup. The two flute geometry provides stability during continuous cutting cycles in aluminium. Without internal coolant the flutes would clog rapidly at this depth ratio causing tool failure. The drill is built for production runs where hole quality and tool life depend on constant coolant flow.
Highlights
- Designed for aluminium with a 5x reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design reduces heat buildup
- Cyclone series built for high-speed drilling
- M.A. Ford quality for professional workshops
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 5X in the Cyclone Drill name mean for hole depth?
The 5X designation indicates this drill can reach a depth of five times its diameter in a single pass, making it suitable for deeper holes in aluminium without pecking.
How does the coolant-fed design affect chip evacuation?
Internal coolant channels deliver fluid directly to the cutting edges, flushing chips out of the flutes and reducing heat buildup during high-speed aluminium drilling.
What shank style does the CDACRM1090 use for tool-holder mounting?
The drill features a standard cylindrical shank that fits common ER collets, Weldon flats or hydraulic holders used on CNC machining centres.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
