M.A. Ford
M.A. Ford CDACRM1020 Cyclone Drill for Aluminum 5X 2 Flute Coolant Fed
A coolant-fed cyclone drill for aluminium with two flutes, 5X reach and model CDACRM1020
- 5x diameter drilling depth for faster hole making
- two-flute geometry improves chip evacuation in aluminium
- coolant-fed design delivers lubrication to the cutting zone
- Cyclone series engineered for high-performance aluminium work
- new condition ensures full factory performance
M.A. Ford CDACRM1020 Cyclone Drill for Aluminum
The M.A. Ford CDACRM1020 Cyclone Drill is a new cutting tool designed for aluminium machining. It features a 5X diameter drilling depth capability and a two-flute geometry. Coolant-fed channels deliver lubricant directly to the cutting zone for chip evacuation. This drill suits CNC operations requiring precise holes in non-ferrous materials.
Machinists targeting aluminium workpieces
This drill suits machinists producing deep holes in aluminium alloys on CNC equipment. The coolant-fed design supports high material-removal rates where through-tool lubrication is available. Shops without through-spindle coolant systems should look at alternative tooling. Buyers needing diameters or lengths outside the 1020 specification must select a different model.
5X depth with two-flute coolant-fed design
The defining specification is the 5X diameter drilling depth combined with a two-flute coolant-fed construction. This geometry determines reach, chip flow and cooling efficiency in a single parameter. Verify that the machine spindle provides through-coolant capability before purchase. The 1020 designation identifies the specific size variant within the Cyclone series.
Highlights
- 5x diameter drilling depth for faster hole making
- two-flute geometry improves chip evacuation in aluminium
- coolant-fed design delivers lubrication to the cutting zone
- Cyclone series engineered for high-performance aluminium work
- new condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the CDACRM1020 need for a secure fit in the holder?
The CDACRM1020 uses a standard shank that matches common drill chucks; verify the holder size against the tool diameter before clamping.
Which step is often missed when installing the coolant-fed CDACRM1020?
Connecting the internal coolant supply to the spindle interface is frequently overlooked, causing the drill to run dry.
When should the CDACRM1020 be replaced based on wear?
Replace the drill when the cutting edges show visible rounding or when hole quality in aluminum drops below tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
