M.A. Ford
M.A. Ford CDACRM1000 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
A coolant-fed, two-flute cyclone drill for aluminium with 5x diameter reach
- Designed for aluminium with 5x reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design reduces heat build-up
- M.A. Ford brand ensures professional quality
- California Proposition 65 chemical warning applies
M.A. Ford CDACRM1000 Cyclone Drill
The M.A. Ford CDACRM1000 Cyclone Drill is a cutting tool designed for aluminium machining. It features a 5X diameter-to-length ratio with two flutes and internal coolant delivery. This drill targets professionals producing deep holes in non-ferrous materials. The new condition ensures full factory geometry and coating integrity.
Sustained cutting with coolant feed
Internal coolant channels evacuate chips efficiently during extended drilling cycles. The 5X length allows deeper holes without pecking, reducing cycle time on aluminium workpieces. Two flutes balance chip space and core strength for consistent feed rates. Stable temperatures protect both the tool edge and the part finish during long runs.
Check holder and coolant supply
Verify that your machine spindle accepts the shank style and can deliver coolant through the tool at adequate pressure. Confirm the workholding provides rigidity for the 5X overhang without vibration. Ensure your tool changer or magazine accommodates the overall length. The product carries a California Proposition 65 warning for cancer and reproductive harm.
Highlights
- Designed for aluminium with 5x reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design reduces heat build-up
- M.A. Ford brand ensures professional quality
- California Proposition 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the CDACRM1000 Cyclone Drill generate during continuous 5X drilling in aluminium?
The coolant-fed design channels fluid directly to the two-flute cutting zone, carrying heat away from the workpiece and tool so temperatures stay controlled during extended high-speed runs.
What machine and fluid setup must I already have to run this coolant-fed drill?
You need a CNC or milling spindle that accepts through-tool coolant delivery and a compatible high-pressure coolant system with filtration to feed the CDACRM1000 at the required flow.
Will the CDACRM1000 fit the same tool holders and coolant adapters as my older 3X M.A. Ford drills?
The shank diameter and coolant-port geometry follow M.A. Ford’s current Cyclone standard, so existing holders and adapters that match that standard will accept the 5X 2-flute drill without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
