M.A. Ford
M.A. Ford CDACRM0990 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
A Cyclone drill for aluminium with 5× reach, two flutes, coolant feed and CDACRM0990 designation
- Optimised for aluminium with 5X flute design
- Coolant-fed operation clears chips for cleaner holes
- Two-flute geometry balances strength and chip evacuation
- Cyclone series built for high-speed drilling performance
- Meets California Proposition 65 chemical disclosure requirements
M.A. Ford Cyclone Drill for Aluminum
The M.A. Ford CDACRM0990 is a coolant-fed drill designed for aluminum machining. Its 5X diameter flute length and two-flute geometry support efficient chip evacuation in non-ferrous materials. The tool arrives new and ships directly from the manufacturer. California Proposition 65 warnings apply to this product.
Suited for aluminum work requiring deep holes
Machinists producing deep holes in aluminum will benefit from the coolant-fed design and extended flute length. The two-flute configuration helps maintain hole straightness in soft alloys. Shops without through-spindle coolant capability or those drilling steel, titanium, or hardened materials should select a different tool.
5X diameter flute length with coolant feed
The defining specification is the 5X diameter flute length combined with internal coolant delivery. This pairing enables deeper drilling cycles in aluminum without pecking. Verify that your machine provides through-tool coolant and that the 990 model matches your required diameter before ordering.
Highlights
- Optimised for aluminium with 5X flute design
- Coolant-fed operation clears chips for cleaner holes
- Two-flute geometry balances strength and chip evacuation
- Cyclone series built for high-speed drilling performance
- Meets California Proposition 65 chemical disclosure requirements
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
When will the CDACRM0990 cutting edges need resharpening?
Resharpen when flank wear reaches the shop limit; the 5×D flute length means chips evacuate through coolant holes, so inspect edges each shift.
What limits continuous drilling depth with this 5×D tool?
The 5× diameter flute length sets the maximum hole depth before pecking is required; coolant-fed design helps but does not extend that geometric limit.
How much heat builds up in the shank during all-day aluminum drilling?
Coolant-fed flutes carry heat away from the cutting zone; the shank stays near coolant temperature during sustained 5×D cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
