M.A. Ford
M.A. Ford CDACRM0920 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
High-performance cyclone drill for aluminium with 5x reach and coolant feed
- Cyclone geometry cuts aluminum efficiently
- 5× diameter reach for deep holes
- Two-flute design clears chips fast
- Coolant-fed operation reduces heat buildup
- New condition ensures full factory performance
Cyclone Drill for Aluminium
The M.A. Ford CDACRM0920 is a coolant-fed drill designed for aluminium machining. Its five-times-diameter flute length and two-flute geometry provide deep-hole capability in non-ferrous materials. This new tool targets CNC operators and job-shop machinists who need reliable chip evacuation in aluminium alloys.
5X diameter reach with coolant feed
The 5X flute length gives extended reach for deep pockets and through-holes without pecking cycles. Internal coolant delivery flushes chips from the cutting zone, maintaining hole quality at depth. The two-flute design limits chip space, so very high feed rates in gummy alloys may require reduced parameters.
920 series identifies the tool
The CDACRM0920 model number defines the specific diameter and geometry within the Cyclone range. Selecting the correct 920 series variant ensures the drill matches the programmed hole size and machine interface. Buyers needing a different diameter or flute length must choose another series number.
Highlights
- Cyclone geometry cuts aluminum efficiently
- 5× diameter reach for deep holes
- Two-flute design clears chips fast
- Coolant-fed operation reduces heat buildup
- New condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 5X flute length of the CDACRM0920 reach through the same workpiece thickness as my current 3X drills?
The 5X flute length provides a longer drilling depth in a single pass compared to shorter 3X drills, reducing the need for pecking cycles in deep aluminium holes.
How can I verify the coolant-fed channels of the CDACRM0920 are flowing correctly after installation?
Start the machine at low pressure and observe a steady, uninterrupted coolant stream exiting the drill tip; any sputtering or uneven flow indicates a blockage that must be cleared before cutting.
Does the CDACRM0920 package include collets or coolant adapters, or must they be ordered separately?
The drill is supplied as a single cutting tool; collets, tool holders and coolant delivery adapters are not included and must be sourced to match your machine spindle and coolant system.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
