M.A. Ford
M.A. Ford CDACRM0770 Cyclone Drill for Aluminum 5X 2 Flute Coolant Fed
A 5x diameter, two-flute cyclone drill with internal coolant feed for aluminium
- 5x diameter reach for deep aluminium holes
- 2-flute design clears chips efficiently
- Coolant-fed operation reduces heat buildup
- M.A. Ford Cyclone series built for aluminium
- New condition ready for immediate use
M.A. Ford Cyclone Drill for Aluminum
The M.A. Ford CDACRM0770 Cyclone Drill is engineered for high-performance drilling in aluminum alloys. Its 5X diameter flute length and two-flute geometry support deep-hole accuracy in production environments. Coolant-fed channels deliver lubricant directly to the cutting zone for consistent chip evacuation. This new tool targets machinists who require repeatable results in non-ferrous materials.
5X 2 Flute Coolant-Fed Design
The defining specification is the 5X flute length combined with a two-flute coolant-fed construction. This configuration controls chip formation and heat buildup during extended drilling cycles. The geometry reduces the risk of built-up edge common in soft metals. Shops needing reliable deep-hole capability in aluminum will find this feature decisive.
Suited for Aluminum Production Drilling
Machinists running CNC or dedicated drilling stations for aluminum components will benefit from the coolant-fed design and extended reach. The tool is not intended for handheld use or general-purpose drilling in steel, stainless steel or hardened alloys. Buyers who need a stub-length drill or a tool for interrupted cuts should look at something else. The California Proposition 65 notice applies to this product.
Highlights
- 5x diameter reach for deep aluminium holes
- 2-flute design clears chips efficiently
- Coolant-fed operation reduces heat buildup
- M.A. Ford Cyclone series built for aluminium
- New condition ready for immediate use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How deep can the 5X diameter drill go in one pass?
The 5X rating means the flute length is five times the drill diameter, so the tool can reach a depth equal to five diameters before you need to peck or withdraw.
What shank standard does the CDACRM0770 use for coolant delivery?
The drill has a cylindrical shank with an internal coolant channel that feeds through the tool holder; it fits standard ER collets or Weldon flats that support through-coolant.
What machine-spindle clearance is needed for the 770 flute length?
The 770 mm flute length requires at least that much clear Z-travel plus the holder length, so verify your machining centre has sufficient spindle-to-table distance before ordering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
