M.A. Ford
M.A. Ford CDACRM0700 Cyclone Drill for Aluminum 5X 2 Flute Coolant Fed
Cyclone drill for aluminum with 5X diameter reach, two flutes and coolant-fed design
- Designed for aluminium with 5X performance
- Two-flute geometry clears chips efficiently
- Coolant-fed design reduces heat buildup
- Manufactured by M.A. Ford for reliability
- California Proposition 65 warning applies to this product
Cyclone Drill for Aluminum 5X
The M.A. Ford CDACRM0700 is a solid-carbide drill built for aluminium work that demands a 5× diameter depth of cut. Its two-flute geometry and through-coolant channels target high-volume production and prototype shops that need reliable chip evacuation in non-ferrous alloys.
Sustained load behaviour
Coolant fed directly to the cutting zone keeps temperatures stable during long drilling cycles, reducing the risk of built-up edge on aluminium. The 5× length-to-diameter ratio maintains rigidity without the deflection seen in longer reaches, so hole straightness and surface finish stay consistent through a full shift.
Pre-order checks
Verify that your machine spindle can deliver through-tool coolant at the pressure your aluminium grade requires. Confirm the holder accommodates the shank style and that the work envelope clears the 5× flute length. California Proposition 65 warnings apply — review the listed chemical hazards before use.
Highlights
- Designed for aluminium with 5X performance
- Two-flute geometry clears chips efficiently
- Coolant-fed design reduces heat buildup
- Manufactured by M.A. Ford for reliability
- California Proposition 65 warning applies to this product
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How hot does the CDACRM0700 Cyclone Drill get during extended drilling in aluminum?
The drill is designed for coolant-fed operation, which continuously flushes the cutting zone to control heat buildup during prolonged use in aluminum.
What machine setup is required to run the coolant-fed CDACRM0700 drill?
You need a CNC or milling machine equipped with through-spindle coolant delivery and a compatible tool holder that matches the drill shank.
Will the CDACRM0700 work in an older CNC that only has flood coolant?
Flood coolant alone cannot supply the internal pressure this drill requires; through-spindle coolant is essential for the 5X design to evacuate chips and control temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
