M.A. Ford
M.A. Ford CDACRM0660 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
Cyclone drill for aluminum with 5x diameter depth, two flutes and coolant feed
- Optimised geometry for clean aluminium holes
- Two-flute design improves chip evacuation
- Coolant-fed operation reduces heat build-up
- Five-times diameter reach for deeper drilling
- Prop 65 chemical notice included for compliance
Cyclone Drill for Aluminum 5X 2 Flute
The M.A. Ford CDACRM0660 Cyclone Drill is engineered for high-efficiency drilling in aluminium. Its 5X diameter capability and two-flute geometry suit production environments that demand rapid chip evacuation. Coolant-fed operation supports consistent performance during extended cycles.
Coolant-fed design for aluminium machining
Through-tool coolant delivery clears chips from deep holes without external flooding. The two-flute layout provides generous flute space for aluminium’s long stringy chips. This drill fits standard tool holders used in CNC milling centres and dedicated drilling machines.
Replaces general-purpose drills in aluminium
Standard drills often clog or wander in soft alloys, leading to oversize holes and broken tools. The Cyclone’s specialised point geometry and polished flutes reduce built-up edge and improve hole finish. The jump is worthwhile when hole depth exceeds three diameters or when cycle time must be shortened.
Highlights
- Optimised geometry for clean aluminium holes
- Two-flute design improves chip evacuation
- Coolant-fed operation reduces heat build-up
- Five-times diameter reach for deeper drilling
- Prop 65 chemical notice included for compliance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How deep can the 5X flute design drill before chip evacuation becomes the limiting factor?
The 5X flute geometry is engineered for deep-hole drilling in aluminium, allowing sustained chip removal up to five times the drill diameter before evacuation limits the process.
What heat and noise levels should I expect when running this coolant-fed drill continuously in aluminium?
Coolant fed through the tool flushes heat directly from the cutting zone, keeping the drill body cool and reducing operational noise during extended production runs.
What machine spindle interface and coolant delivery system must I already have to use this drill?
The shank fits standard tool holders for the given diameter, and the machine must supply through-spindle coolant at sufficient pressure to feed the internal channels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
