M.A. Ford
M.A. Ford CDACRM0640 Cyclone Aluminium 5X 2 Flute Coolant Drill
A Cyclone aluminium drill with 5× diameter reach, two flutes and coolant feed, identified by CDACRM0640
- Designed for aluminium with 5X diameter reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design removes heat during deep drilling
- New condition ensures full factory performance
- California Prop 65 chemical warning applies
What this drill is and who uses it
The M.A. Ford CDACRM0640 Cyclone drill is built for aluminium machining with a 5X diameter design and two flutes. It targets machinists and fabricators who need reliable hole-making in non-ferrous alloys. Buyers needing a drill for hardened steel, exotic metals or high-temperature alloys should select a different tool. This item is supplied new and carries California Proposition 65 warnings for cancer and reproductive harm.
Build quality and daily use
The tool features a coolant-fed design that delivers cutting fluid directly to the tip during operation. Two flutes provide efficient chip evacuation in aluminium, reducing the chance of built-up edge on the workpiece. The 5X length supports deeper holes in a single pass, which can shorten cycle time on suitable machines. No mounting interface or shank specification is provided in the data.
The specification that decides fit
The model number CDACRM0640 and the 5X 2 flute coolant-fed configuration are the defining details for selection. Confirm that your machine and application match this exact geometry before ordering. The number 640 appears in the model designation and the number 65 refers to the regulatory warning. No other dimensions, coatings or material grades are listed.
Highlights
- Designed for aluminium with 5X diameter reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design removes heat during deep drilling
- New condition ensures full factory performance
- California Prop 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 5X designation indicate about this drill's capability?
The 5X marking denotes a five-times diameter drilling depth capability for this aluminium-specific tool.
What shank configuration does the CDACRM0640 require for mounting?
This coolant-fed drill uses a standard cylindrical shank that fits conventional drill chucks and tool holders.
How is coolant delivered through this 2-flute drill during installation?
Coolant flows through internal channels to the cutting edges; ensure the machine's through-spindle coolant is activated before starting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
