M.A. Ford
M.A. Ford CDACRM0600 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
A 5× diameter Cyclone drill with two flutes and through-coolant feed for efficient aluminium drilling
- 5x diameter drilling depth for faster through-holes
- Two-flute design improves chip evacuation in aluminium
- Coolant-fed operation reduces heat and extends tool life
- Cyclone series geometry optimised for non-ferrous materials
- New condition ensures full factory performance from first use
Cyclone Drill For Aluminum 5X 2 Flute
The M.A. Ford CDACRM0600 Cyclone Drill is a coolant fed cutting tool designed for aluminium machining. Its 5X diameter flute length and two flute geometry target manufacturers and machine shops producing deep holes in non ferrous alloys. The carbide construction suits high speed CNC operations where chip evacuation and hole straightness are critical.
Sustained Load Behaviour With Coolant Feed
Continuous coolant delivery through the tool flushes chips from the deep flutes during extended drilling cycles. This prevents chip packing that typically degrades hole quality and tool life in aluminium. The two flute design maintains stable cutting forces over long production runs without the vibration that can appear in multi flute drills at high feed rates.
Installation Notes And Common Issues
The drill fits standard tool holders matching its shank specification for direct CNC spindle mounting. Coolant fed operation requires a through spindle or through holder coolant system with adequate pressure and filtration. California Proposition 65 warnings indicate the product contains chemicals linked to cancer and reproductive harm, so appropriate personal protective equipment and ventilation are necessary during handling and machining.
Highlights
- 5x diameter drilling depth for faster through-holes
- Two-flute design improves chip evacuation in aluminium
- Coolant-fed operation reduces heat and extends tool life
- Cyclone series geometry optimised for non-ferrous materials
- New condition ensures full factory performance from first use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the CDACRM0600 generate during continuous drilling in aluminum?
The coolant-fed design delivers fluid directly to the cutting zone, which carries heat away from the 2-flute carbide body during extended 5×-diameter drilling cycles.
What machine setup is required to use the coolant-fed feature on this drill?
A spindle or holder with through-coolant capability and a compatible coolant supply system must already be in place for the internal channels to function.
Will the 600 series Cyclone drill fit in an older tool holder that only accepts straight-shank drills?
The shank follows the standard dimensions for this diameter range, so it seats in any correctly sized collet or chuck the shop already owns.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
