M.A. Ford
M.A. Ford CDACRM0530 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
A 5× diameter cyclone drill with two flutes and coolant feed for aluminium machining
- Designed for aluminium with 5X reach and 2 flute geometry
- Coolant-fed design improves chip evacuation during deep-hole drilling
- Cyclone series optimised for high-performance non-ferrous applications
- M.A. Ford precision manufacturing ensures consistent hole quality
- California Proposition 65 warning applies — contains listed chemicals
M.A. Ford CDACRM0530 Cyclone Drill
The M.A. Ford CDACRM0530 Cyclone Drill is a new cutting tool engineered specifically for aluminium work. It features a 5x diameter drilling depth capability with a two-flute design and internal coolant feed. This configuration targets efficient chip evacuation and heat management in non-ferrous metal applications.
Suited for aluminium drilling with coolant access
Machinists drilling aluminium alloys who can supply coolant through the tool spindle will benefit from the extended reach and flute geometry. Workshops without through-spindle coolant capability or those primarily cutting steel, titanium or hardened materials should select a different drill style.
5x diameter drilling depth defines reach
The 5x depth-to-diameter ratio is the critical specification determining whether this drill reaches your required hole depth in a single pass. Verify your aluminium workpiece thickness against this ratio before ordering. The coolant-fed design also requires compatible machine tooling to function as intended.
Highlights
- Designed for aluminium with 5X reach and 2 flute geometry
- Coolant-fed design improves chip evacuation during deep-hole drilling
- Cyclone series optimised for high-performance non-ferrous applications
- M.A. Ford precision manufacturing ensures consistent hole quality
- California Proposition 65 warning applies — contains listed chemicals
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank size does the CDACRM0530 need in my drill chuck?
The drill uses a standard straight shank that fits any chuck accepting its diameter; match the chuck capacity to the shank size.
Will the 5X flute length reach through the thicker aluminium plates I keep in stock?
The 5X flute design provides extended reach for deeper holes in aluminium while maintaining chip evacuation.
How do I confirm coolant is flowing correctly through the CDACRM0530 after installation?
Run the machine at low speed and verify a steady coolant stream exits the drill tip before starting the cut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
