M.A. Ford
M.A. Ford CDACRM0420 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
A coolant-fed cyclone drill with two flutes designed for aluminium machining
- Designed for aluminium machining with 5x diameter reach
- Two-flute geometry improves chip evacuation in soft alloys
- Internal coolant feed delivers lubrication to the cutting zone
- Cyclone series optimised for high-speed drilling applications
- California Proposition 65 warning applies to this product
Aluminium 5× Coolant-Fed Drill
This cyclone drill is built for aluminium work where a 5× diameter reach and through-coolant delivery keep chips clear and temperatures low. The two-flute geometry supports stable chip evacuation in non-ferrous alloys. It suits CNC and high-speed machining centres that can supply coolant through the spindle. Shops cutting deep pockets in aluminium will value the extended reach.
Coolant Pressure And Chip Control Limits
Effective chip removal depends on machine-side coolant pressure and volume; insufficient flow lets chips pack in deep holes. The two-flute design offers less chip space than three- or four-flute alternatives, so very long uninterrupted cuts may need peck cycles. Workpiece clamping rigidity and spindle run-out also limit achievable depth without deflection. Operators must match feed and speed to the machine capability.
Step Up From Standard Twist Drills
Conventional twist drills without through coolant often overheat and wander beyond 3× diameter in aluminium. This tool replaces them when hole depth exceeds that range and the machine provides coolant-through capability. The jump is worth it for production runs where cycle time and tool life outweigh the higher per-unit cost. Job shops without through-coolant spindles gain no advantage.
Highlights
- Designed for aluminium machining with 5x diameter reach
- Two-flute geometry improves chip evacuation in soft alloys
- Internal coolant feed delivers lubrication to the cutting zone
- Cyclone series optimised for high-speed drilling applications
- California Proposition 65 warning applies to this product
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How does the 5X length compare to shorter drills for deep aluminium holes?
The 5X length allows deeper drilling in aluminium without pecking, while the coolant-fed design clears chips and reduces heat buildup during extended cuts.
What does the 2-flute geometry mean for chip removal in aluminium?
Two wide flutes evacuate aluminium chips efficiently, and internal coolant delivery pushes chips out of deep holes to prevent clogging and tool breakage.
How does the coolant-fed shank work with standard tool holders?
The shank accepts standard coolant-through holders; internal channels deliver fluid directly to the cutting zone, improving tool life and hole finish in aluminium.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
