M.A. Ford
M.A. Ford CDACRM0410 Cyclone Drill for Aluminum 5X 2 Flute Coolant Fed
A coolant-fed Cyclone drill for aluminium with 5x reach, two flutes and model CDACRM0410
- Designed for aluminium machining with 5X diameter reach
- Two-flute geometry improves chip evacuation in non-ferrous metals
- Coolant-fed design delivers fluid directly to the cutting zone
- M.A. Ford manufacturing ensures consistent drill performance
- California Proposition 65 warning applies to this product
Cyclone Drill for Aluminum 5X 2 Flute
The M.A. Ford CDACRM0410 Cyclone Drill is a new coolant-fed cutting tool built for aluminium work. Its two-flute geometry and five-times-diameter reach suit production drilling where chip evacuation and hole straightness matter. Machinists and fabricators who need reliable performance in non-ferrous alloys will find it fits standard toolholding systems.
Replaces conventional aluminium drills lacking
Stepping up from a standard solid-carbide drill without internal coolant is worth it when hole depth approaches five diameters and heat buildup threatens tool life or surface finish. The coolant-fed design flushes chips continuously, reducing peck cycles and improving roundness. Shops drilling shallow holes in free-machining alloys may not see a measurable gain.
Limited by coolant delivery and machine rigidity
The drill’s five-times-diameter length demands stable spindle runout and consistent coolant pressure to prevent deflection or chip packing. Machines without through-spindle coolant or with limited pressure cannot exploit the internal channels fully. California Proposition 65 warnings apply, noting chemicals known to cause cancer and reproductive harm.
Highlights
- Designed for aluminium machining with 5X diameter reach
- Two-flute geometry improves chip evacuation in non-ferrous metals
- Coolant-fed design delivers fluid directly to the cutting zone
- M.A. Ford manufacturing ensures consistent drill performance
- California Proposition 65 warning applies to this product
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What diameter shank does the CDACRM0410 Cyclone Drill require for the tool holder?
The drill uses a standard cylindrical shank that matches the 410 series collet size for secure clamping in coolant-fed holders.
Which installation step is most often missed when fitting this coolant-fed drill?
Operators frequently forget to verify the coolant port alignment before tightening the holder, causing flow blockage.
When should the 2-flute cutting edges on this aluminum drill be replaced?
Replace the drill once flank wear reaches the 65 threshold or when chip evacuation noticeably deteriorates in aluminum alloys.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
