M.A. Ford
M.A. Ford CDACRM0390 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
Cyclone drill for aluminium with 5× diameter reach, two flutes, coolant feed and CDACRM0390 identification
- Designed for aluminium machining
- 5× diameter reach for deeper holes
- Two-flute geometry improves chip evacuation
- Coolant-fed design enhances tool life
- Meets California Proposition 65 requirements
Cyclone Drill for Aluminium 5X 2 Flute
The M.A. Ford CDACRM0390 Cyclone Drill is designed for aluminium machining with a five-times-diameter reach and two-flute geometry. Coolant-fed operation evacuates chips efficiently during deep-hole drilling. It suits CNC operators and job-shop technicians who need reliable performance in non-ferrous materials.
Coolant-fed installation and chip control
Mount the drill in a holder that supplies coolant through the tool body to activate the internal channels. Ensure the machine spindle delivers sufficient pressure for the coolant-fed design to clear chips from the flutes. Insufficient coolant flow or misaligned holders often cause chip packing and premature wear in deep-hole applications.
Machine and holder compatibility checks
Verify that your CNC machine provides through-spindle coolant capability and that the tool holder matches the drill shank specification. Confirm the workholding allows the full 5X drilling depth without interference. California Proposition 65 warnings apply; review safety data sheets before use.
Highlights
- Designed for aluminium machining
- 5× diameter reach for deeper holes
- Two-flute geometry improves chip evacuation
- Coolant-fed design enhances tool life
- Meets California Proposition 65 requirements
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How can I verify the M.A. Ford CDACRM0390 Cyclone Drill is cutting aluminium correctly after installation?
Check that the 2-flute design produces clean chips and the coolant-fed channels deliver steady flow through the tool body during operation.
What accessories come with the M.A. Ford CDACRM0390 and what must I supply separately?
The drill itself is supplied; you must provide a compatible coolant-fed tool holder, high-pressure coolant system and work-holding fixtures.
Which M.A. Ford Cyclone Drill variant should I select for a 5× diameter deep-hole application in aluminium?
Choose the CDACRM0390 model designated 5X with 2-flute coolant-fed geometry for that specific depth-to-diameter ratio.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
