M.A. Ford
M.A. Ford CDACRM0350 Cyclone Drill 5X 2 Flute Coolant Fed 350
A 5× diameter coolant-fed drill with two flutes for aluminium, model CDACRM0350
- Designed for aluminium with 5X reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design reduces heat buildup
- Brand-new M.A. Ford Cyclone drill
- California Prop 65 chemical warning applies
Cyclone Drill for Aluminium 5X
The M.A. Ford CDACRM0350 is a solid-carbide Cyclone drill built for aluminium. Its 5X diameter flute length and two-flute geometry are designed for high-speed production drilling. Internal coolant channels deliver fluid directly to the cutting zone for chip evacuation and tool life.
Suited for high-volume aluminium work.
Machinists running dedicated aluminium jobs on CNC machines with through-spindle coolant will benefit from the 5X reach and polished flutes. Shops without coolant-fed spindles, or those drilling steel, stainless or titanium, should select a different tool.
5X diameter flute length sets the drilling depth
The single specification that decides fit is the 5X diameter flute length, which determines the maximum hole depth in a single pass. Verify that your machine spindle and coolant system support through-tool delivery before ordering.
Highlights
- Designed for aluminium with 5X reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design reduces heat buildup
- Brand-new M.A. Ford Cyclone drill
- California Prop 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How is the coolant-fed drill installed and what step is commonly missed?
The drill mounts in a standard tool holder; the step often missed is verifying that the machine's through-spindle coolant system is pressurised and filtered before the first cut.
What maintenance or replacement will the Cyclone drill need later?
The two-flute carbide tip will dull after extended aluminium drilling and should be resharpened or replaced once flank wear reaches the manufacturer's limit.
What limit appears first during sustained high-speed use?
Heat buildup in the coolant-fed flutes becomes the limiting factor, requiring reduced feed or dwell cycles to prevent thermal damage to the 350 mm cutting length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
