M.A. Ford
M.A. Ford CDACR3906 Cyclone Drill for Aluminum 5X 2 Flute Coolant Fed
Cyclone drill designed for aluminium with 5X performance, two flutes and coolant-fed operation
- Designed for aluminum with a 5X flute geometry
- Two-flute coolant-fed design improves chip evacuation
- M.A. Ford brand trusted for industrial drilling performance
- New condition ensures full factory specification compliance
- California Proposition 65 listed for chemical awareness
Aluminium drilling specialist
The M.A. Ford Cyclone drill targets aluminium with a five-times-diameter flute length and two-flute geometry. Coolant-fed channels deliver lubricant directly to the cutting zone for chip evacuation. It suits CNC operators and job-shop machinists who need reliable hole-making in non-ferrous alloys.
Sustained cutting behaviour
Coolant flow through the tool body stabilises temperature during long drilling cycles. The two-flute design maintains consistent chip formation and prevents packing in deep holes. This reduces the risk of built-up edge and extends tool life when running repeated passes in production environments.
Coolant-fed interface limits
Effective operation requires a machine spindle and holder capable of delivering pressurised coolant through the tool. Without through-spindle capability the internal channels cannot function as intended. Shops lacking this infrastructure should consider alternative drill designs.
Highlights
- Designed for aluminum with a 5X flute geometry
- Two-flute coolant-fed design improves chip evacuation
- M.A. Ford brand trusted for industrial drilling performance
- New condition ensures full factory specification compliance
- California Proposition 65 listed for chemical awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the CDACR3906 generate noticeable heat during extended drilling in aluminium?
The cyclone flute geometry evacuates chips efficiently, which reduces friction and keeps the cutting zone cooler during long production runs.
What tool-holder or machine setup is required to use the coolant-fed CDACR3906?
A spindle or holder with through-coolant capability and a compatible collet or chuck for the drill shank are needed to deliver coolant through the tool.
Can the CDACR3906 be run on an older CNC mill that only offers external flood coolant?
The drill is designed for through-coolant delivery; without internal coolant pressure chip evacuation and tool life will be reduced compared to a machine that supports it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
