M.A. Ford
M.A. Ford CDACR3594 Cyclone Aluminum 5X 2 Flute Coolant Drill
A 5× diameter coolant-fed drill with two flutes designed for aluminium machining
- Optimised for aluminium with 5× diameter drilling depth
- Two-flute geometry improves chip evacuation in soft metals
- Coolant-fed design reduces heat buildup during deep holes
- Cyclone series engineered for high-speed production runs
- California Proposition 65 warning applies to this product
Cyclone Aluminum 5X Drill
The M.A. Ford CDACR3594 is a coolant-fed drill built for aluminium work. Its two-flute geometry and 5X length suit production runs where chip evacuation and hole depth matter. Machinists targeting non-ferrous alloys will find the design matches that specific need.
Coolant Feed And Machine Fit
Verify that your spindle and holder can deliver coolant through the tool. Confirm the shank style matches your collet or chuck without adapters. Ensure the machine programme allows the longer 5X reach without interference from fixtures or the workpiece.
Sustained Drilling Behaviour
Continuous coolant flow keeps the cutting zone stable during deep-hole cycles. The two flutes maintain evacuation so chips do not pack during extended cuts. Thermal load stays consistent, reducing the risk of built-up edge on aluminium. California Proposition 65 warnings apply.
Highlights
- Optimised for aluminium with 5× diameter drilling depth
- Two-flute geometry improves chip evacuation in soft metals
- Coolant-fed design reduces heat buildup during deep holes
- Cyclone series engineered for high-speed production runs
- California Proposition 65 warning applies to this product
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the M.A. Ford CDACR3594 come with coolant fittings or do I need to source them separately?
The drill is sold as the cutting tool only; coolant supply fittings and delivery hardware are not included and must be purchased to match your machine.
When should I choose the 5X 2-flute version over other Cyclone drills?
Select this 5X 2-flute coolant-fed model when you need a five-times-diameter reach in aluminium and want chip evacuation through internal coolant channels.
What does the 5X designation mean for hole depth in practice?
It indicates the drill can produce holes up to five times its diameter deep in a single pass when run with proper coolant pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
