M.A. Ford
M.A. Ford CDACR3281 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
Cyclone drill for aluminum with 5x reach, two flutes and coolant-fed operation
- Designed for aluminium with 5X performance
- Two-flute geometry improves chip evacuation
- Coolant-fed design extends tool life
- Brand-new condition ensures full factory specification
- California Proposition 65 warning applies
Cyclone Drill For Aluminum
The M.A. Ford CDACR3281 is a dedicated cutting tool engineered specifically for aluminium workpieces. Its 5X diameter flute length and two-flute geometry target machinists and fabricators who need deep-hole capability in non-ferrous alloys. The coolant-fed design supports continuous chip evacuation during extended drilling cycles. This drill suits production environments where aluminium removal rates and hole straightness are critical.
Two Flute Coolant Fed Construction
The two-flute layout balances chip space with core strength for stable deep drilling in soft, gummy material. Internal coolant channels deliver fluid directly to the cutting zone, reducing built-up edge and improving surface finish. This configuration implies the machine spindle must support through-tool coolant delivery and the holder must seal correctly. Daily use demands a rigid setup and clean coolant filtration to prevent channel blockage.
Verify Machine And Holder Compatibility
Confirm your spindle and tool holder provide through-coolant capability at the required pressure before ordering. The 5X flute length requires sufficient Z-axis travel and clearance within the work envelope. Buyers without internal coolant delivery or with limited stroke length cannot use this tool as intended. California Proposition 65 warnings apply to chemicals present in the product.
Highlights
- Designed for aluminium with 5X performance
- Two-flute geometry improves chip evacuation
- Coolant-fed design extends tool life
- Brand-new condition ensures full factory specification
- California Proposition 65 warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 5X designation mean for the CDACR3281 Cyclone Drill?
The 5X marking indicates a five-times-diameter drilling depth capability for efficient aluminium work.
What shank style does the CDACR3281 drill use for tool-holder fit?
It uses a standard cylindrical shank that fits common collets and drill chucks.
How is the coolant-fed feature activated on the CDACR3281 drill?
Connect the machine’s through-spindle coolant supply; the internal channels deliver fluid to the cutting edges.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
