M.A. Ford
M.A. Ford CDACR2969 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
Five-times-diameter drill with two flutes and coolant feed for aluminium work
- Optimised for aluminium machining with 5X flute design
- Two-flute geometry improves chip evacuation in soft metals
- Coolant-fed channels reduce heat build-up during deep holes
- Cyclone series engineered for high-speed drilling applications
- California Proposition 65 warning applies to this product
Aluminum 5X Drill Purpose
The M.A. Ford CDACR2969 Cyclone drill targets aluminium machining with a 5X diameter design and two flutes. Coolant-fed operation supports chip evacuation during extended cuts. It suits CNC users who need a dedicated tool for non-ferrous materials rather than a general-purpose twist drill.
Thermal and Power Behaviour
Coolant flow through the tool manages cutting temperature and reduces friction in the flute area. Stable temperatures lower the risk of built-up edge on aluminium. The design does not generate unusual spindle load, so standard machine power curves apply without extra cooling infrastructure.
Build and Connection Practicalities
The shank fits standard holders used for coolant-through tooling, letting the drill seat directly in existing collets or hydraulic chucks. Two flutes simplify regrinding geometry compared with higher-flute counts. California Proposition 65 notices flag chemical content, so operators should follow shop safety protocols for handling and disposal.
Highlights
- Optimised for aluminium machining with 5X flute design
- Two-flute geometry improves chip evacuation in soft metals
- Coolant-fed channels reduce heat build-up during deep holes
- Cyclone series engineered for high-speed drilling applications
- California Proposition 65 warning applies to this product
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do you install the CDACR2969 Cyclone Drill in a coolant-fed holder, and what step is often missed?
Mount the drill in a holder with through-coolant capability, then verify the coolant passages align before tightening; the step often missed is confirming flow reaches both flutes.
What maintenance or replacement will the 2-flute aluminum drill need later?
The cutting edges will dull with use; plan to resharpen or replace the drill once hole quality or feed force degrades beyond acceptable limits.
What limit appears first on the CDACR2969 during sustained high-speed drilling in aluminum?
Heat buildup at the cutting zone typically limits sustained use before flute wear becomes critical, especially if coolant pressure drops.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
