M.A. Ford
M.A. Ford CDACR2340 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed Drill A
5X diameter coolant-fed Cyclone drill with two flutes for aluminium, model CDACR2340
- Designed for aluminium machining with Cyclone geometry
- 5× diameter reach for deeper holes in one pass
- Two-flute design improves chip evacuation in soft alloys
- Internal coolant feed extends tool life and finish
- New M.A. Ford drill ready for production use
M.A. Ford CDACR2340 Drill for Aluminium
The M.A. Ford CDACR2340 Cyclone drill is engineered for aluminium machining with a 5x diameter depth capability and two flutes. It features internal coolant feed to evacuate chips and manage heat during deep-hole drilling. This new tool targets professionals producing precise holes in aluminium workpieces.
Suited for aluminium deep-hole drilling.
Machinists drilling aluminium at 5x diameter depths will benefit from the coolant-fed design and flute geometry. Buyers who need to drill steel, titanium or composites should look at something else because the geometry is specific to aluminium. Shops without through-spindle coolant capability cannot use the internal feed feature.
5x diameter depth with coolant feed decides fit
The defining specification is the 5x diameter drilling depth combined with the coolant-fed design. This determines whether the tool reaches your required hole depth while clearing chips effectively. Verify your machine provides through-tool coolant before selecting this drill. California Proposition 65 warnings apply.
Highlights
- Designed for aluminium machining with Cyclone geometry
- 5× diameter reach for deeper holes in one pass
- Two-flute design improves chip evacuation in soft alloys
- Internal coolant feed extends tool life and finish
- New M.A. Ford drill ready for production use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What comes in the box with the CDACR2340 Cyclone Drill and what must I purchase separately?
The box contains the M.A. Ford CDACR2340 drill bit only. Tool holders, coolant systems and work-holding fixtures are not included and must be sourced separately.
Which diameter or length version of the CDACR2340 should I select for my application?
The CDACR2340 is a single 5×D, two-flute, coolant-fed drill for aluminium; no alternative diameters or lengths are offered under this part number.
What does the 5×D specification mean when the drill is running in a CNC machine?
It indicates the drill can reach a depth five times its diameter in a single pass, using internal coolant to evacuate chips efficiently in aluminium.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
