M.A. Ford
M.A. Ford CDACR1910 Cyclone Drill for Aluminum 5X 2 Flute Coolant Fed
A Cyclone drill for aluminium with 5× reach, two flutes and coolant feed
- Designed for aluminium drilling efficiency
- Five-times-diameter reach for deep holes
- Two-flute geometry improves chip evacuation
- Coolant-fed design enhances tool life
- California Proposition 65 chemical warning applies
Cyclone Drill for Aluminum
The M.A. Ford CDACR1910 is a 5X diameter coolant-fed drill with two flutes, engineered specifically for aluminum machining. It delivers efficient chip evacuation and temperature control in high-speed drilling operations.
Suited for CNC aluminum work
This tool suits machinists running CNC stations that supply through-spindle coolant and need deep-hole capability in non-ferrous alloys. It is not for hand-held drilling, shops without coolant delivery, or materials such as steel, titanium, or composites.
5X depth with coolant feed
The defining specification is the 5X diameter drilling depth combined with internal coolant channels, which determines whether the tool matches your machine’s coolant system and the hole-depth requirements of the job.
Highlights
- Designed for aluminium drilling efficiency
- Five-times-diameter reach for deep holes
- Two-flute geometry improves chip evacuation
- Coolant-fed design enhances tool life
- California Proposition 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What drill chuck size do I need to hold the CDACR1910 Cyclone Drill?
The shank diameter must match your chuck capacity; verify the shank size on the tool before selecting a chuck.
Can I run the CDACR1910 at the same spindle speeds I use for standard HSS drills?
This drill is designed for 5× diameter depth in aluminium with coolant feed; adjust speed and feed to the manufacturer’s aluminium parameters rather than HSS defaults.
How do I confirm the CDACR1910 is delivering coolant correctly after installation?
Start the spindle at low speed, engage coolant, and verify a steady stream exits both flute holes at the drill tip before beginning the cut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
