M.A. Ford
M.A. Ford CDACR1875 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
A cyclone drill for aluminium with 5x diameter reach, two flutes and coolant feed
- Designed for aluminium machining with 5x diameter reach
- Two-flute geometry improves chip evacuation in soft metals
- Coolant-fed design delivers lubrication directly to the cutting zone
- M.A. Ford manufacturing ensures consistent drill performance
- California Proposition 65 warning applies to this product
Cyclone Drill for Aluminium 5X 2 Flute
The M.A. Ford CDACR1875 is a solid-carbide drill engineered for high-speed aluminium machining. Its two-flute geometry and through-coolant channels evacuate chips efficiently in deep-hole applications. The 5× diameter length suits production runs where cycle time matters. This tool arrives new and ships directly from the manufacturer.
Machinists targeting aluminium alloys
The design serves CNC operators who need reliable chip control in non-ferrous materials. Shops cutting steel, titanium or composites should select a different substrate and geometry. Buyers requiring a 3× or 8× length variant will not find it in this listing. The Prop 65 notice indicates regulated substances are present.
5× diameter reach with coolant feed
The defining spec is the 5× diameter flute length combined with internal coolant delivery. That pairing determines whether the drill reaches your hole depth while maintaining temperature control. No other length or cooling option is offered for this part number.
Highlights
- Designed for aluminium machining with 5x diameter reach
- Two-flute geometry improves chip evacuation in soft metals
- Coolant-fed design delivers lubrication directly to the cutting zone
- M.A. Ford manufacturing ensures consistent drill performance
- California Proposition 65 warning applies to this product
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the CDACR1875 Cyclone Drill generate during continuous all-day operation in aluminum?
The drill uses internal coolant channels to manage temperature while cutting, reducing thermal buildup in the workpiece and tool body during extended use.
What machine setup is required to run the coolant-fed CDACR1875 drill?
A CNC or milling machine with through-spindle coolant capability and a compatible tool holder is needed to supply cutting fluid through the drill's internal passages.
Will the 5× diameter CDACR1875 fit in the same tool changer slots as my older 3× drills?
The longer 5× flute length increases overall tool length, so verify your machine's tool changer pocket depth and clearance before swapping from shorter drills.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
