M.A. Ford
M.A. Ford CDACR1610 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
A coolant-fed cyclone drill with two flutes designed for 5× drilling depth in aluminium
- Designed for aluminium with 5× diameter reach
- Two-flute geometry clears chips efficiently in soft metal
- Coolant-fed design delivers fluid to the cutting zone
- Cyclone series built for high-speed drilling performance
- M.A. Ford quality trusted by professional machinists
Cyclone Drill for Aluminium
The M.A. Ford CDACR1610 is a 5× diameter coolant-fed drill built for aluminium machining. Its two-flute geometry and internal coolant delivery target high material-removal rates in non-ferrous workpieces. It suits CNC operators and job-shop machinists who need deep-hole capability in a single pass.
Coolant-fed depth constraint
Internal coolant channels allow the tool to reach five times its diameter without peck cycles, but the machine must supply filtered coolant at sufficient pressure. Shops running minimum-quantity lubrication or dry air blast cannot exploit the full depth rating. Chip evacuation relies entirely on that coolant flow.
5× diameter reach
The defining specification is the 5× diameter flute length, which decides whether the drill covers your required hole depth in one operation. If the part calls for deeper holes, this tool will not reach; if the holes are shallower, a shorter drill may offer better rigidity.
Highlights
- Designed for aluminium with 5× diameter reach
- Two-flute geometry clears chips efficiently in soft metal
- Coolant-fed design delivers fluid to the cutting zone
- Cyclone series built for high-speed drilling performance
- M.A. Ford quality trusted by professional machinists
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I choose the right version of the CDACR1610 Cyclone Drill for my application?
The CDACR1610 is a single model configured as a 5X diameter, two-flute, coolant-fed drill for aluminum. Select it when those exact parameters match your hole-depth and material requirements.
What does the 5X designation mean when the drill is in the machine?
The 5X figure indicates the drill can reach a depth up to five times its diameter in a single pass, reducing peck cycles and improving chip evacuation in aluminum.
How does the coolant-fed design affect the drilling standard in practice?
Internal coolant delivery flushes chips from deep holes and cools the cutting edges, allowing the two-flute geometry to maintain diameter tolerance and surface finish at the full 5X depth capability.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
