M.A. Ford
M.A. Ford CDACR1590 Cyclone Drill for Aluminum 5x 2 Flute Coolant Fed
Cyclone drill for aluminium with five 2-flute coolant-fed bits for efficient chip removal
- Optimised for aluminium with a 5x reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design supports controlled temperatures
- Built by M.A. Ford for professional use
- Complies with California Proposition 65 requirements
Cyclone Drill for Aluminum
The M.A. Ford CDACR1590 is a new cyclone drill designed specifically for aluminium machining. It features a 5x diameter drilling depth capability and a two-flute geometry with internal coolant delivery. This tool targets professional machinists and fabrication shops requiring efficient chip evacuation in non-ferrous materials.
Suited for deep-hole aluminium work
This drill suits operators producing deep holes in aluminium alloys where through-coolant capability prevents chip packing. It is not intended for buyers who need a drill for hardened steels, stainless steel or cast iron. Shops without through-spindle coolant systems should look at alternative tooling.
Standard shank fits common holders
Installation follows normal tool-holding procedures for the shank style supplied; no special adapters are mentioned in the data. The main risk is running the tool without adequate coolant pressure, which can cause premature wear or breakage in deep-hole applications. Proposition 65 warnings apply.
Highlights
- Optimised for aluminium with a 5x reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design supports controlled temperatures
- Built by M.A. Ford for professional use
- Complies with California Proposition 65 requirements
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle is required for the 1590 coolant-fed drill?
The 1590 drill needs a spindle that can deliver coolant through the tool and accept a shank matching the drill diameter.
Can the 1590 drill be used in a standard drill press without coolant?
It is designed for coolant-fed operation; running it dry in a standard press will reduce tool life and hole quality in aluminium.
How do I verify the 1590 drill is cutting correctly after setup?
Check for consistent chip evacuation through the flute, a smooth hole finish, and stable spindle load without excessive heat buildup.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
