M.A. Ford
M.A. Ford 2XDSR0236A Twister XD 5X 0.60 mm solid carbide drill
Solid carbide drill bit for high-precision holemaking at 0.60 mm diameter
- Twister XD 5X design drills five times diameter in one pass
- 60 mm solid carbide construction resists wear in hard materials
- M.A. Ford manufacturing quality ensures consistent hole accuracy
- California Proposition 65 notice flags cancer and reproductive-risk chemicals
- Ships direct from manufacturer for faster order fulfilment
Twister XD 5X 0.60 mm drill
The Twister XD 5X is a solid carbide drill designed for precision holemaking in demanding materials. It suits machinists and maintenance teams who need consistent performance on small-diameter work. The 0.60 mm cutting diameter targets fine-detail applications where rigidity and accuracy are critical. This accessory fits standard collets and chucks used in high-speed spindles.
Practical limits of solid carbide at this diameter
Solid carbide delivers hardness and wear resistance but becomes brittle at 0.60 mm, so excessive feed or vibration can cause breakage. The 5X length-to-diameter ratio restricts use to shallow holes where chip evacuation remains manageable. Coolant pressure and spindle run-out must be controlled to avoid premature wear. California Proposition 65 warnings indicate the presence of substances linked to cancer and reproductive harm.
Build quality and day-to-day implications
The carbide substrate holds sharp edges longer than cobalt steel, reducing tool changes during repetitive runs. A cylindrical shank allows quick clamping in ER collets or hydraulic holders without special adapters. Flute geometry promotes chip curling, yet the narrow diameter demands frequent peck cycles in deeper cuts. Orders of $75 or more ship free directly from the manufacturer.
Highlights
- Twister XD 5X design drills five times diameter in one pass
- 60 mm solid carbide construction resists wear in hard materials
- M.A. Ford manufacturing quality ensures consistent hole accuracy
- California Proposition 65 notice flags cancer and reproductive-risk chemicals
- Ships direct from manufacturer for faster order fulfilment
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Is the 0.60 mm diameter the only size available in this Twister XD 5X series?
The listed part is the 0.60 mm solid carbide drill; other diameters would carry different part numbers.
What does the 5X designation mean for drilling depth on this 0.60 mm tool?
5X indicates a flute length roughly five times the diameter, giving about 3 mm of effective drilling depth.
What shank standard does the 2XDSR0236A use and what collet size does it require?
It uses a common cylindrical shank matching the 0.60 mm body, so a 0.60 mm collet or adjustable chuck is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
