M.A. Ford
M.A. Ford 2XDCE4724A Twister XD Drill 12X-25X Coolant Fed 12.00mm
Coolant-fed drill operates at 12X to 25X speeds with a 12.00 mm diameter
- 12X-25X drill depth range suits deep-hole applications
- 00 mm diameter matches precise hole-size requirements
- Coolant-fed design improves chip evacuation and tool life
- Twister XD geometry enhances cutting performance in tough materials
- M.A. Ford brand denotes professional-grade cutting-tool engineering
12.00 mm Twister XD drill
The M.A. Ford 2XDCE4724A is a 12.00 mm diameter drill designed for deep-hole applications. Its 12X to 25X diameter length range suits workshops that need extended reach in a single pass. The coolant-fed design delivers lubricant directly to the cutting zone. This tool targets machinists who prioritise hole straightness and chip evacuation at depth.
Coolant-fed deep-hole limits
Internal coolant channels enable consistent performance where external flood coolant cannot reach the tip. The 12X minimum depth capability covers most standard deep-hole requirements. Beyond 25X diameter the drill exceeds its designed length envelope and stability drops. Operators must match machine spindle rigidity and coolant pressure to the chosen depth ratio.
Diameter and depth headroom
The fixed 12.00 mm diameter handles a narrow size band without regrinding. At 12X depth the tool clears chips reliably in most steels and cast irons. At 25X depth chip packing becomes the limiting factor even with high-pressure coolant. The Proposition 65 notice indicates regulated substances are present in the tool material or coating.
Highlights
- 12X-25X drill depth range suits deep-hole applications
- 00 mm diameter matches precise hole-size requirements
- Coolant-fed design improves chip evacuation and tool life
- Twister XD geometry enhances cutting performance in tough materials
- M.A. Ford brand denotes professional-grade cutting-tool engineering
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Which 2XDCE4724A variant should I pick for a 12 mm hole?
The drill is supplied as a single 12.00 mm diameter option, so no alternative size choice is needed.
What does the 12X-25X range mean when the drill is in the machine?
It indicates the tool can operate at 12 to 25 times its diameter depth with coolant fed through the flutes.
How does the coolant-fed design affect the drilling standard?
Internal coolant delivery allows deeper, straighter holes at the 12X-25X depth ratio while managing heat and chip evacuation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
