M.A. Ford
M.A. Ford 2XDCE4646A Twister Xd Drill 12X-25X Coolant Fed 11.80mm
Twister XD coolant-fed drill reaches 12X-25X diameter depths in 11.80mm size
- Drills deep holes at 12X-25X diameter with through-coolant feed
- 80 mm cutting diameter matches precise hole-size requirements
- Twister Xd geometry improves chip evacuation in tough materials
- Coolant-fed design reduces heat buildup for longer tool life
- M.A. Ford quality ensures reliable performance in demanding applications
M.A. Ford 11.80mm Twister Xd Drill
The M.A. Ford 2XDCE4646A Twister Xd Drill is a coolant-fed cutting tool with an 11.80mm diameter. It is designed for drilling depths between 12 and 25 times the diameter. This drill serves machinists and manufacturing operations requiring deep-hole capability with through-tool coolant delivery.
Suited for deep-hole drilling with coolant
This drill suits users who need a single tool for 12X to 25X depth ratios and internal coolant supply. It is not for buyers who need a drill without coolant feed or a different diameter. Operations requiring a shorter or longer reach than the 12X-25X range should look at alternative tooling.
11.80mm diameter with 12X-25X depth range
The decisive specification is the 11.80mm cutting diameter combined with the 12X to 25X drilling depth capability. This defines the hole size and maximum reach achievable in a single pass. Confirm these two figures match the application requirements before purchase.
Highlights
- Drills deep holes at 12X-25X diameter with through-coolant feed
- 80 mm cutting diameter matches precise hole-size requirements
- Twister Xd geometry improves chip evacuation in tough materials
- Coolant-fed design reduces heat buildup for longer tool life
- M.A. Ford quality ensures reliable performance in demanding applications
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 11.80mm Twister Xd drill in a coolant-fed holder, and what step is often missed?
Secure the drill in a compatible coolant-fed toolholder, align the 12X-25X flute geometry with the spindle, and ensure the coolant port seals fully — operators often forget to verify the seal before starting.
What maintenance or replacement will the 11.80mm Twister Xd drill need after extended use?
Inspect the cutting edges and flute surfaces for wear or chipping after prolonged drilling cycles; replace the drill when diameter tolerance drops below spec or coolant flow becomes restricted.
What limit appears first on the 11.80mm Twister Xd drill during sustained high-feed drilling?
The 12X-25X length-to-diameter range makes chip evacuation and heat buildup the primary constraints — flute packing typically limits continuous depth before tool deflection becomes critical.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
