M.A. Ford
M.A. Ford 2XDCE3937A Twister Xd Drill 12X-25X Coolant Fed 10.00Mm
Twister Xd drill handles 12X-25X depth ratios with coolant feed at 10.00mm diameter
- Twister Xd design enables 12X to 25X drilling depth
- Coolant-fed operation improves chip evacuation and tool life
- 00 mm diameter suits precise hole-making tasks
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 warning indicates chemical safety awareness
Twister Xd Drill 12X-25X Coolant Fed
This M.A. Ford drill is a solid-carbide tool built for deep-hole drilling in tough materials. Internal coolant channels deliver fluid directly to the cutting zone for chip evacuation and temperature control. The 10.00 mm cutting diameter suits precision machining operations.
Suited for CNC deep-hole work; not for hand-held use
Machinists running CNC centres with through-spindle coolant gain the full benefit of the 12X to 25X length-to-diameter capability. Workshops without high-pressure coolant systems or rigid machine tools should consider alternative tooling.
10.00 mm cutting diameter
The nominal diameter is 10.00 mm, which sets the pilot-hole size and determines the maximum achievable hole depth within the 12X to 25X range. Verify the required diameter against your drawing before ordering.
Highlights
- Twister Xd design enables 12X to 25X drilling depth
- Coolant-fed operation improves chip evacuation and tool life
- 00 mm diameter suits precise hole-making tasks
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 warning indicates chemical safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Should I choose the 12X or 25X version of the 10.00 mm Twister Xd drill?
The 12X variant gives a shorter flute length for rigid setups while the 25X variant reaches deeper holes; both are coolant-fed 10.00 mm drills from the same series.
What does the 12X-25X range mean for actual hole depth in a 10.00 mm drill?
It indicates the length-to-diameter ratio, so a 10.00 mm drill can drill 12 to 25 times its diameter deep when coolant is fed through the tool.
How does the coolant-fed design affect the 12X-25X drilling capability?
Internal coolant delivery clears chips and controls heat, allowing the drill to reach the full 12X to 25X depth range in tough materials without pecking.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
