M.A. Ford
M.A. Ford 2XDCE3346A Twister XD Drill 12X-25X Coolant Fed 8.50mm
Coolant-fed drill for 12 to 25 times diameter depth with 8.50 mm diameter
- Twister XD design handles 12X-25X diameter depths
- 50 mm diameter fits precise drilling tasks
- Coolant-fed operation clears chips during deep cuts
- M.A. Ford manufacturing ensures professional-grade durability
- Complies with California Proposition 65 chemical disclosure requirements
8.50 mm Twister XD Drill
The M.A. Ford 2XDCE3346A Twister XD Drill is a coolant-fed tool built for 12X to 25X diameter drilling depths. It targets machine shops and maintenance teams that need accurate deep holes in a single operation. The 8.50 mm diameter suits specific pilot-hole requirements in metalworking.
For deep-hole drilling in metal
This drill suits operators running CNC or dedicated deep-hole machines with through-coolant capability. It is not for hand-held use, machines without coolant feed, or jobs requiring diameters outside 8.50 mm. Buyers needing stepped or multi-diameter tools should look elsewhere.
12X to 25X depth range
The defining specification is the 12X to 25X drill-depth-to-diameter capability. This range decides whether the tool reaches the required hole depth without pecking. Verify your machine can deliver the coolant pressure and stability this depth range demands.
Highlights
- Twister XD design handles 12X-25X diameter depths
- 50 mm diameter fits precise drilling tasks
- Coolant-fed operation clears chips during deep cuts
- M.A. Ford manufacturing ensures professional-grade durability
- Complies with California Proposition 65 chemical disclosure requirements
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the Twister XD 8.50mm drill so the coolant feed works without leaking?
Fit the drill into a holder with through-coolant capability, align the 8.50mm shank fully, and torque the retention nut to the holder maker’s spec — the step most people skip is checking the coolant seal orientation before tightening.
What maintenance will the 12X-25X Twister XD 8.50mm drill need after extended use?
Inspect the cutting edges and coolant exit holes after each job; resharpen only on a CNC grinder that respects the original geometry, and replace the tool once the flank wear reaches the maker’s discard limit.
What limit appears first when running the Twister XD 8.50mm drill continuously at high feed?
The 12X-25X length-to-diameter range means chip evacuation and coolant pressure become the limiting factors before the carbide substrate overheats.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
