M.A. Ford
M.A. Ford 2XDCE3125A Twister Xd Drill 12X-25X Coolant Fed 7.94Mm
Coolant-fed Twister XD drill reaches 12X–25X depth at 7.94 mm diameter
- Drilling depth range 12 to 25 diameters
- Coolant-fed design improves chip evacuation
- 94 mm diameter suits precise holemaking
- Twister XD geometry optimised for difficult materials
- California Proposition 65 chemical warning applies
7.94 mm coolant-fed drill
The M.A. Ford 2XDCE3125A Twister Xd Drill is a 7.94 mm high-performance drill designed for 12X to 25X diameter deep-hole drilling. It features internal coolant delivery to evacuate chips and control heat in demanding materials. This new tool targets machinists and manufacturers who need reliable straightness and hole quality in deep-drilling operations. It suits CNC environments where consistent performance reduces scrap and cycle time.
Best for deep-hole CNC work
This drill suits shops running dedicated deep-hole cycles on rigid CNC machines with through-spindle coolant capability. It is not for hand-held use, drill presses without coolant, or applications needing only standard 3X to 5X lengths. Buyers who need larger or smaller diameters, or who lack high-pressure coolant systems, should look at other tooling. The specialised geometry requires stable workholding and precise run-out control.
12X-25X depth range decides fit
The single specification that determines suitability is the 12X to 25X drill-depth capability combined with the 7.94 mm diameter. If your holes fall outside this depth-to-diameter window, or if your machine cannot deliver coolant through the tool, this drill will not perform as intended. Match the depth range and coolant requirement to your process before ordering.
Highlights
- Drilling depth range 12 to 25 diameters
- Coolant-fed design improves chip evacuation
- 94 mm diameter suits precise holemaking
- Twister XD geometry optimised for difficult materials
- California Proposition 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the 7.94 mm Twister XD drill need for a secure fit in the holder?
The drill has a 7.94 mm cutting diameter; match the holder bore to that size for a secure fit.
How do I connect coolant to the 12X-25X Twister XD drill and what step is often missed?
Feed coolant through the tool’s internal channels; the step often missed is verifying seal integrity at the holder interface before cutting.
When should the 7.94 mm Twister XD drill be replaced based on wear?
Replace the drill when flank wear reaches the manufacturer’s limit or when hole size drifts beyond tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
