M.A. Ford
M.A. Ford 2XDCE3071A Twister Xd Drill 12X-25X Coolant Fed 7.80mm
A coolant-fed drill operating at 12 to 25 times diameter with a 7.80 mm cutting size
- Drills deep holes with 12-25x diameter reach
- Coolant-fed design clears chips for cleaner cuts
- Precise 7.80mm diameter matches exact hole specs
- M.A. Ford brand trusted for professional tooling
- California Prop 65 warning informs safe handling practices
M.A. Ford Twister Xd Drill 7.80mm
The M.A. Ford Twister Xd drill is a coolant-fed cutting tool designed for 12X to 25X diameter drilling depths. It targets machine shops and production lines that require deep-hole capability in a single pass. The 7.80mm diameter suits precise hole-making in metal components.
Suited for deep-hole drilling with coolant feed
This drill suits operators running CNC machines with through-spindle coolant who need consistent chip evacuation at depth. It is not for hand-held use, machines without coolant delivery, or applications requiring diameters outside 7.80mm.
12X to 25X depth range with single diameter
The tool comfortably handles holes from 12 to 25 times its 7.80mm diameter when coolant pressure and machine rigidity are adequate. It runs out when hole depth exceeds the 25X limit or when the workpiece material demands a different geometry or coating not provided by this model.
Highlights
- Drills deep holes with 12-25x diameter reach
- Coolant-fed design clears chips for cleaner cuts
- Precise 7.80mm diameter matches exact hole specs
- M.A. Ford brand trusted for professional tooling
- California Prop 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle or holder is needed to run the 7.80 mm Twister Xd drill?
A rigid CNC or machining centre spindle with through-coolant capability that accepts a 7.80 mm shank is required to use this drill at its 12X–25X length-to-diameter range.
Can the 12X–25X Twister Xd drill be used in an older drill press without through-coolant?
The drill is designed for coolant-fed operation; running it on a conventional drill press without internal coolant delivery will limit performance and tool life.
How can I confirm the 7.80 mm Twister Xd is cutting correctly after installation?
Check for consistent chip evacuation through the coolant holes, steady spindle load, and hole diameter within tolerance at the full 12X–25X depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
